User manual SONY MHC-GR7

[. . . ] The model and serial numbers are located on the rear panel. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. To prevent fire or shock hazard, do not expose the unit to rain or moisture. [. . . ] The required tape length for the currently selected CD appears, followed by the total playing time and tracks for side A and side B. Select a (or RELAY) to record on both sides. You cannot use this function after programming. In order to use this function, you must first erase the program (see "To clear the entire program" on page 22). After the last track, "CHECK END" appears. Press PLAY MODE repeatedly until "PROGRAM" or "SHUFFLE" disappears from the display. With the loop function, you can repeat part of a CD during playback. This lets you create original recordings. With the flash function, you can "flash" the CD sound during playback. This lets you create original recordings. Playback at the point you want to start the Loop function, and release to resume normal play. to adjust the loop length Turn the jog dial while holding LOOP (or press MUSIC MENU B or b while holding LOOP on the remote) to select different loop lengths (LOOP 1~20). Playback at the point you want to start the Flash function, and release to resume normal play. to adjust the flash length Turn the jog dial while holding FLASH (or press MUSIC MENU B or b while holding FLASH on the remote) to select different flash lengths (FLASH 1~20). To use LOOP and FLASH together The loop and flash length cannot be adjusted during this operation. To record the flash effect, use the analog (VIDEO/ MD OUT) connections or this unit's tape deck. With the Wave function, you can fluctuate the graphic equalizer automatically. This effect can be used with any source, but it cannot be recorded. Turn the jog dial while holding WAVE to select a different wave length (WAVE 1~10). You can reinforce the bass, create a more powerful sound, and listen with headphones. With some songs, the music will sound distorted when you use the DBFB system with the graphic equalizer if the bass is too strong. Adjust the bass slowly while listening to music so that you can monitor the effect of the adjustment. [. . . ] Insert only the stripped portion of the speaker cord into the SPEAKER jack. Demagnetize the tape heads and the metal parts that have contact with the tape every 20 to 30 hours of use with a separately sold demagnetizing cassette. Move the stereo system away from the TV or VCR. DAILY1, DAILY 2, and REC do not appear when you press the TIMER SELECT button. [. . . ]