User manual SONY MHC-GRX30J

[. . . ] This appliance is classified as a CLASS 1 LASER product. This label is located on the rear exterior. Don't throw away the battery with general house waste, dispose of it correctly as chemical waste. Notes on VIDEO CDs · This system conforms to VIDEO CDs without PBC* functions (Ver. 1. 1) and VIDEO CDs with PBC functions (Ver. [. . . ] You can then tune in any of those stations simply by selecting the corresponding preset number. There are two ways to store the station presets. To Method Setting presets through automatic tuning 1 Press TUNER/BAND repeatedly to select "FM" or "AM". 2 Press and hold ­ or + (or TUNING ­ or + on the remote) until the frequency indication starts to change, then release it. Automatically tune in all of the stations that can be received in your area and then store them manually Manually tune in and store the radio frequency of your favorite stations Automatic Tuning Preset Scanning stops automatically when the system tunes in a station. "TUNED" and "STEREO" (for an FM stereo program) appear. If "TUNED" does not appear and the scanning does not stop Tuner Manual Tuning Preset Set the frequency of the desired radio station as described in steps 2 through 6 of "Setting presets through manual tuning" on page 20. 3 Press TUNER MEMORY on the remote. A preset number appears in the display. The stations are stored from preset number 1. Preset number 4 Press . or > (or PRESET ­ or + on the remote) repeatedly to select the desired preset number. 5 Press ENTER on the remote. 6 Repeat steps 1 to 5 to store other stations. continued 19GB Presetting radio stations (continued) Other Operations To Do this Setting presets through manual tuning Tune in a station Follow the procedure described in "Setting presets through manual with a weak tuning". signal Set another station to an existing preset number Start over from step 1. or > (or PRESET ­ or + on the remote) repeatedly to select the preset number you want to store the other station. 1 Press TUNER/BAND repeatedly to select "FM" or "AM". 2 Press ­ or + (or TUNING ­ or + on the remote) repeatedly to tune in the desired station. 3 Press TUNER MEMORY on the remote. A preset number appears in the display. The stations are stored from preset number 1. To change the AM tuning interval 4 Press . or > (or PRESET ­ or + on the remote) repeatedly to select the desired preset number. 5 Press ENTER on the remote. 7 Press ?/1 to turn off the system. When the recording starts, the volume level is set to minimum. Other Operations To Do this Check the setting 1 Tune in the preset radio station (see "Listening to the radio" on page 21). Press CLOCK/TIMER SELECT on the remote and press . or > on the remote repeatedly to select "REC SELECT", then press ENTER on the remote. Press CLOCK/TIMER SELECT on the remote and press . or > on the remote repeatedly to select "TIMER OFF", then press ENTER on the remote. 2 Press CLOCK/TIMER SET on the remote. Change the setting Start over from step 1. Cancel the timer "DAILY SET" appears. 3 Press . or > on the remote repeatedly to select "REC SET", then press ENTER on the remote. "ON" appears and the hour indication flashes in the display. Notes 4 Set the time to start recording. Press . or > on the remote repeatedly to set the hour, then press ENTER on the remote. or > on the remote repeatedly to set the minute, then press ENTER on the remote. · The system turns on 15 seconds before the preset time. · If the system is on at the preset time, the recording will not be made. · When you use the Sleep Timer, Timer-recording and Daily Timer will not turn on the system until the Sleep Timer turns it off. · You cannot activate the Daily Timer and Timerrecording at the same time. 5 Repeat step 4 to set the time to stop recording. The start time appears, followed by the stop time, the preset radio station to be recorded (e. g. , "TUNER FM 5"), then the original display appears. 24GB Sound Adjustment To cancel the effect Adjusting the sound You can reinforce the bass and create a more powerful sound. [. . . ] · Place the system in a location with adequate ventilation to prevent heat build up in the system. · If you continuously use this system at a large volume, the cabinet temperature of the top, side and bottom rises considerably. To avoid burning yourself, do not touch the cabinet. · To prevent a malfunction, do not cover the ventilation hole for the cooling fan. Tab of side B Break off the cassette tab of side A Tab of side A continued 37GB Precautions (continued) Before placing a cassette in the tape deck Take up any slack in the tape. [. . . ]