User manual SONY MHC-GRX40AV

[. . . ] The model and serial numbers are located on the rear panel. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. To prevent fire or shock hazard, do not expose the unit to rain or moisture. [. . . ] **Relay play always follows the following sequence: Deck A (front side), Deck A (reverse side), Deck B (front side), Deck B (reverse side). Pressing TAPE A 9( or TAPE B 9( when the system is off automatically turns the system on and starts tape playback if there is a tape in the deck (One Touch Play). You can switch from another source to the tape deck just by pressing TAPE A 9( or TAPE B 9( (Automatic Source Selection). You can check the remaining time of the current track or that of the CD. To check the total playing time and the number of tracks on a CD press DISPLAY in the stop mode. If you press DISPLAY again, the clock display appears for 10 seconds then the display returns to the previous indication. Each time you press the button during normal playback, the display changes as follows: N Playing time on the current track Remaining time on the current track Disc number of the current track and "PLAY" Clock display (for 10 seconds) Effect name or "FLAT" Name of spectrum analyzer display pattern This function lets you repeat a single CD or all CDs in normal play, Shuffle Play and Program Play. Do the following procedure to change the repeat mode. To repeat All the tracks on the current CD All the tracks on all CDs Only one track Press PLAY MODE repeatedly until "1 DISC" appears in the display. pLAY MODE repeatedly until "ALL DISCS" appears in the display. REPEAT repeatedly until "REPEAT 1" appears in the display while playing the track you want to repeat. Playing the CD tracks in random order ­ Shuffle Play You can play all the tracks on one CD or all CDs in random order. "J" appears and then all the tracks play in random order. Press PLAY MODE repeatedly until "SHUFFLE" or "PROGRAM" disappears from the display. The tracks continue playing in their original order. When recording from a CD, you can use the jog dial to select tracks during rec pause mode (after pressing REC in step 3 and before pressing PAUSE in step 5). Note that you cannot use Tape Select Edit for discs containing over 20 tracks. The indicator on TAPE B ( (for front side) lights up. If the indicator for the tray you want to record is not lit green, press DISC SKIP/ EX-CHANGE repeatedly so that it lights green. Select ß (or RELAY) to record on both sides. The required tape length for the currently selected CD appears, followed by the total playing time for side A and side B respectively. You cannot use this function after programming. [. . . ] press DOLBY PROLOGIC to turn off the Pro Logic mode. There is no sound from the center speaker. There is no sound from the rear speakers. The software being played back has limited sound effects. [. . . ]