User manual SONY MHC-GX250

[. . . ] The model and serial numbers are located on the rear of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. To prevent fire or shock hazard, do not expose the unit to rain or moisture. [. . . ] Select j (or RELAY) to record on both sides. Press the function button of the source you want to record (e. When you want to record from TAPE A, press TAPE A/B repeatedly until TAPE A is selected. Press REC PAUSE/START, and then start singing, speaking or playing the desired source. You can wake up to music at a preset time. Make sure you have set the clock (see "Setting the clock" on page 10). Falling asleep to music -- Sleep Timer You can set the system to turn off after a certain time, so that you can fall asleep to music. Prepare the sound source you want to play. Each time you press the button, the minute display (the turn-off time) changes cyclically as follows: AUTO* t 90MIN t 80MIN t 70MIN t . t 10MIN t OFF * The system automatically turns off in 100 minutes or after the current disc or tape finishes playing. To start from a specific track, make a program (see "Creating your own program" on page 14). â· Tape: Load a tape with the side you want to play facing forward. * You cannot check the remaining time if you select "AUTO". Do not set to "AUTO" during Synchro Recording on a tape. Or > repeatedly to set the hour, then press ENTER. You can use the Sleep Timer, even if you have not set the clock. Set the time to stop playing following the same procedure as step 5. Or > repeatedly until the desired sound source appears. Each time you press the button, the display changes cyclically as follows: The type of timer ("PLAY TIMER"), the start time, the stop time, and the sound source appear in turn, before the original display returns. You can record a preset radio station from a specified time. To timer record, you must first preset the radio station (see "Presetting radio stations" on page 15) and set the clock (see "Setting the clock" on page 10). Repeatedly until "PLAY SELECT" appears, then press ENTER. [. . . ] To avoid burning yourself, do not touch the cabinet. Clean the cabinet, panel and controls with a soft cloth slightly moistened with mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent such as thinner, benzine or alcohol. To prevent a tape from being accidentally recorded over, break off the cassette tab from side A or B as illustrated. [. . . ]