User manual SONY MHC-R770

[. . . ] Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. The following caution label is located inside the apparatus. US and foreign patents licensed from Dolby Laboratories. Don't throw away the battery with general house waste, dispose of it correctly as chemical waste. [. . . ] When tuner reception is poor, set CD/DVD player power off by DVD power manage function. Use buttons on the CD/DVD player for the operation. Repeat the procedure above and "DVD POWER ON" appears. To change the AM tuning interval, tune in any AM station first, then turn off the system. When you change the interval, all the AM preset stations are erased. to reset the interval , repeat the same procedure. Use buttons on the CD/DVD player for the operation. The preset stations are retained for half a day even if you disconnect the mains lead or if a power failure occurs. When an FM stereo program has static noise, press FM MODE repeatedly until "MONO" appears. Press TUNING MODE repeatedly until "AUTO" appears in step 3 above, then press TUNING ­/+ (or m/M on the CD/DVD player). The frequency indication changes and scanning stops when the system tunes in a station (Automatic Tuning). If you start from the reverse side, recording stops at the end of the reverse side. ⷠIf you select both sides recording and the tape reaches the end of the front side part-way through a track, the entire track is recorded again from the beginning of the reverse side. Press DVD and load a disc you want to record. Select "j" (or "RELAY") to record on both sides. To record a VIDEO CD/CD/MP3 by specifying track order You can record only your favorite tracks using Program Play. Between steps 2 and 3, perform steps 1 to 5 of "Creating your own program" (page 19). When programming, make sure the playing time for each side do not exceed the length of one side of the tape. You can record just the portions you like from a disc (DVD, VIDEO CD, CD, MP3), radio or other connected component on a tape. Use buttons on the CD/DVD player for the operation. For all models, when you press z START in step 4, the surround effect automatically changes to either HP 2CH or LINK (see "Selecting the surround effect" on page 43). ⷠYou cannot listen to other sources while recording. [. . . ] A number that divides a track into sections to easily locate the point you want on a VIDEO CD. Various angles, or viewpoints of the video camera, for a scene are recorded on some DVDs. Compared to the Interlace format that alternately shows every other line of an image (field) to create one frame, the Progressive format shows the entire image at once as a single frame. This means that while the Interlace format can show 30 frames (60 fields) in one second, the Progressive format can show 60 frames in one second. [. . . ]