User manual SONY MHC-RG475S

[. . . ] The model and serial numbers are located on the rear of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. [. . . ] Turn MIC LEVEL to MIN to turn down the microphone control level. connect an optional microphone to MIC jack. (Mexican model only) Press MULTIPLEX repeatedly to obtain the karaoke effect you desire. Then, load a recordable tape in deck B and press TAPE A/B repeatedly to select deck B. Press the function button of the source you want to record (e. When you want to record from TAPE A, press TAPE A/B repeatedly until TAPE A is selected. Each time you press the button, the display changes cyclically as follows: MPX L t MPX R t MPX OFF To sing karaoke of multiplex CD, select "MPX L" or "MPX R". Press REC PAUSE/START, and then start singing, speaking or playing the desired source. After you have finished Turn MIC LEVEL to MIN and disconnect the microphone from MIC jack. Microphone does not function while the tape deck is performing the AMS operation (page 17). Turn MIC LEVEL to MIN and disconnect the microphone from MIC jack, then press MULTIPLEX repeatedly until "m" disappears. Turn on your TV and select the correct video input. If acoustic feedback (howling) occurs, move the microphone away from the speakers or change the direction of the microphone. â· If you want to record your voice through the microphone only, you can do so by selecting the CD function and not playing a disc. â· When high level sound signals are input, the system automatically adjusts the recording level to prevent distortion of the recorded sound signal (Auto Level Control function). You can wake up to music at a preset time. Make sure you have set the clock (see "Setting the clock" on page 9). Falling asleep to music -- Sleep Timer You can set the system to turn off after a certain time, so that you can fall asleep to music. Prepare the sound source you want to play. Each time you press the button, the minute display (the turn-off time) changes cyclically as follows: AUTO* t 90MIN t 80MIN t 70MIN t . t 10MIN t OFF * The system automatically turns off in 100 minutes or after the current disc or tape finishes playing. To start from a specific track, make a program (see "Creating your own program" on page 13). [. . . ] When using a tape longer than 90 minutes the tape is very elastic. Do not change the tape operations such as play, stop, and fast-winding frequently. Clean the tape heads after every 10 hours of use. Be sure to clean the tape heads before you start an important recording or after playing an old tape. [. . . ]