User manual SONY MHC-RX33

[. . . ] The model and serial numbers are located on the rear panel. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. To prevent fire or shock hazard, do not expose the unit to rain or moisture. [. . . ] With the side you want to play/record on facing forward This function lets you repeat a single CD or all CDs in normal play, Shuffle Play and Program Play. Each time you press the button during normal playback, the display changes as follows: N Playing time on the current track µ Remaining time on the current track µ Disc tray number and "PLAY" µ Clock display (for about 10 seconds) µ Effect name or "FLAT" Do the following procedure to change the repeat mode. To repeat All the tracks on the current CD All the tracks on all CDs Only one track Press PLAY MODE repeatedly until "1 DISC" appears in the display. pLAY MODE repeatedly until "ALL DISCS" appears in the display. REPEAT repeatedly until "REPEAT 1" appears in the display while playing the track you want to repeat. Playing the CD tracks in random order â­Â­ Shuffle Play You can play all the tracks on one CD or all the CDs in random order. "1 DISC" shuffles the CD whose disc tray number is displayed. "J" appears and then all the tracks play in random order. Playing the CD tracks in random order (continued) To cancel Shuffle Play Press PLAY MODE repeatedly until "SHUFFLE" or "PROGRAM" disappears from the display. The tracks continue playing in their original order. You can make a program of up to 32 tracks from all the CDs in the order you want them to be played. You can start Shuffle Play during normal play by pressing PLAY MODE repeatedly to select "SHUFFLE". Press = or + repeatedly until the desired track appears in the display. Disc number Track number Skip step 4 to select tracks from the same disc. All the tracks play in the order you selected. Press PLAY MODE repeatedly until "PROGRAM" or "SHUFFLE" disappears from the display. The track is programmed and the program step number appears. After the last track, "CHECK END" appears. CHECK on the remote repeatedly until the number of the track to be erased appears, then press CLEAR. P once in stop mode or twice while playing. The program you made remains in the CD player even after it has been played back. If the total playing time does not appear while programming, this means: ­ you have programmed a track number which exceeds 20, or ­ the total playing time has exceeded 100 minutes. [. . . ] Should any solid object or liquid fall into the component, unplug the stereo system and have the component checked by qualified personnel before operating it any further. â· The AC power cord must be changed only at the qualified service shop. Use a soft cloth slightly moistened with mild detergent solution. To prevent a tape from being accidentally recorded over, break off the cassette tab from side A or B as illustrated. [. . . ]