User manual SONY MHC-RX90

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. This caution label is located inside the unit. This stereo sytem is equipped with the Dolby* Btype noise reduction system. [. . . ] Turn the jog dial while holding down CHAIN. You can vary the speed of the drums by turning the jog dial counterclockwise (for pad A) or clockwise (for pad B). When the APPLAUSE MIX function is selected, you will not hear the drum pad during the applause. Using the beat function With the beat function, you can create a variety of rhythms automatically. This effect can be used with any source, to create original recordings. Hold down BEAT SPEED and turn the jog dial (or press BEAT SPEED +/­ on the remote) to select the speed you desire (BPM 70~140). You can select from 8 different beat patterns. Hold down BEAT SELECT and turn the jog dial (or press BEAT SELECT +/­ on the remote) to select the pattern you desire. You can use the drum pads and the beat function together. When the APPLAUSE MIX function is selected, you will not hear the drum beat during the applause. Press BEAT ON/OFF to make sure the indicator is off, then start playing a source. Press BPM CONTROL repeatedly to obtain the beat speed you desire. Every time you press the button a voice says, "one, two, three, four, one . Pressing BPM CONTROL lets you synchronize the beat with the source. You can reinforce the bass, create a more powerful sound, and listen with headphones. With some songs, the music will sound distorted when you use the DBFB system with the graphic equalizer if the bass is too strong. Adjust the bass slowly while listening to music so that you can monitor the effect of the adjustment. To cancel the DBFB level, press DBFB until the indication disappears. If you have connected a super woofer, please note that sound comes from the super woofer even when the headphones are connected. Turn off the power of the super woofer when using headphones. Every time you press the button, the display changes as follows: DBFB "DBFB "DBFB n n DBFB n display off " is more effective than ". The volume switches to power mode, DBFB is automatically set to full strength, the equalizer curve changes, and the "GROOVE" button lights up. [. . . ] Use separately sold dry-type or wet-type cleaning cassette. Demagnetize the tape heads and the metal parts that have contact with the tape every 20 to 30 hours of use with a separately sold demagnetizing cassette. Move the stereo system away from the TV or VCR. DAILY1, DAILY 2, and REC do not appear when you press the TIMER SELECT button. [. . . ]