User manual SONY MHC-RX900

[. . . ] Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) If the disc begins with a CD-DA (or MP3) session, it is recognized as a CD-DA (or MP3) disc, and playback continues until another session is encountered. To Generate a more dynamic sound (Dynamic Sound Generator X-tra) Press DSGX on the unit. This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. [. . . ] "REP1" indicates that a single track or file is repeated until you stop it. The STANDBY indicator on the unit lights up when the system is off. you cannot set the clock in Power Saving Mode. 3) The clock display automatically turns to Power Saving Mode after eight seconds. Connect the power cord to a wall socket. Right speaker If the plug does not fit the wall socket, (Low freq. If the component has the AVLS (Automatic Volume Limiter System) or BASS BOOST function, turn off the function to avoid distorted sound from the speakers. Do not save other types of tracks or files or unnecessary folders on a disc that has MP3 files. folders that have no MP3 files are skipped. MP3 files are played back in the order that they are recorded onto the disc. The system can only play MP3 files that have a file extension of ". With the side you want to record facing up. Place the disc you want to record and press DISC SKIP/EX-CHANGE to select a disc. When recording a folder from an MP3 disc, press PLAY MODE repeatedly to select " , " and then press +/­ repeatedly to select the desired folder. To record only your favorite CD tracks or MP3 files in your desired order, perform steps 2 to 5 of "Creating your own CD program. Repeatedly until the desired track number appears. When programing MP3 files, press +/­ repeatedly to select the desired folder, and then select the desired file. Selected track or file number Immediately unplug the power cord, and check the following item. If your system has a voltage selector, is the voltage selector set to the correct voltage?After the STANDBY indicator on the unit stops flashing, reconnect the power cord, and turn on the system. To display the clock and then press while holding down on the unit. With CD player power turned off, disc access time is increased. [. . . ] Return to Normal Play by pressing PLAY MODE repeatedly until both "PGM" and "SHUF" disappear. If another station is already assigned to the selected preset number, the station is replaced by the new stations. Starting playback takes more time than usual. Break off the cassette's overwrite protection tab from side A or B as illustrated. [. . . ]