User manual SONY MHC-RXD7

[. . . ] Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. Don't throw away the battery with general house waste, dispose of it correctly as chemical waste. Note on power cord plug shapes (Saudi Arabian model only) (The 13 A 3-pin plug is attached when shipped from the factory. 38 (MHC-GN999D/MHC-GN999DS/ MHC-GNZ88D/MHC-GNZ77D* only) * Russian model only Using the on-screen display to search for a title/chapter/scene/track/ index/album/file . [. . . ] Center speaker distance from the listening position can be set in 0. 0m1)2) listening position can be set in 0. When you perform QUICK SETUP (page 19), the default settings are changed. The setting range changes depending on the front speaker setting. When you adjust the speaker distance, the sound may cut off for a moment. If each front and surround speakers are not placed at an equal distance from your listening position, set the distance according to the closest speaker. Do not place the surround speakers further away from your listening position than the front speakers. The test tone is not emitted from the speakers. the test tone is emitted from each speaker in sequence. * The test tone is emitted from the selected speakers when you set "LEVEL (FRONT)" or "LEVEL (SURROUND)". You can adjust the level of the front speakers, center speaker and subwoofer as follows. Press and hold TUNING +/­ until the frequency indication starts to change and then release. Repeat steps 1 to 6 to store other stations. "AUTO" lights up in the display when the system starts scanning for a station. Scanning stops automatically and "AUTO" disappears from the display when a station is tuned in. "TUNED" lights up in the display. When a FM stereo program is tuned in, "STEREO" lights up in the display. If "TUNED" does not light up and the scanning does not stop Set the frequency of the radio station you want as described in step 2 of "Manual tuning preset". You can manually tune in and store the frequency of your favourite stations. The factory setting for AM tuning interval is 9 kHz (or 10 kHz for some areas). Use the buttons on the unit for the operation. 3 Hold down ILLUMINATION and then press The stations are stored from preset number 1. [. . . ] The limitation varies from disc to disc; when it is activated, playback is completely prohibited, violent scenes are skipped or replaced with other scenes and so on. This system is used to protect copyrights. A region code is allocated on each DVD system or DVD VIDEO according to the sales region. Each region code is shown on the unit as well as on the disc packaging. [. . . ]