User manual SONY MHC-RXD8

[. . . ] and don't place lighted candles on the apparatus. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. 7 Inserting two size AA (R6) batteries into the remote . 29 Falling asleep to music -- Sleep Timer . [. . . ] ­ When the unit is placed near a television. When you select j or RELAY, the deck stops automatically after repeating the sequence 5 times. * Relay Play always follow this cyclic sequence: Deck A (front side) t Deck A (reverse side) t Deck B (front side) t Deck B (reverse side) You can record from a CD, tape, radio or other connected component. You can use TYPE I (normal) or TYPE II (CrO2) tapes. the recording level is adjusted automatically. Steps Recording from a CD (CD Synchro Recording) Recording from a tape (High-Speed Dubbing) Recording manually Insert the tape you want to record into deck A. To reduce the hiss noise in low-level high-frequency signals, press DOLBY NR so that "DOLBY NR" appears in the display (except when recording from a tape). Select j (or RELAY) to record on both sides. If you want to record from the reverse side, press n or N (Deck B) which does not light up after step 4 (when the deck B is in recording pause). ⷠWhen you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side. Once you customize a sound field, the changes are stored in the memory indefinitely (unless the unit is unplugged for half a day). You can change a customized sound field any time by making new adjustments to the parameters. 1 VIRTUAL: Lights up when the sound field with virtual speakers is selected. 2 dts: Lights up when DTS signals are input. 3 ; DIGITAL: Lights up when the unit is decoding signals recorded in the Dolby Digital format. 4 PRO LOGIC: Lights up when the unit applies Pro Logic processing to two channel signals in order to output the center and rear channel signals. However, this indicator does not light if the rear speakers are set to "NO". The boxes around the letters vary to show how the unit downmixes the source sound (based on the speakers settings). When using sound fields like "LARGE HALL" or "SMALL HALL", the unit adds reverberation based on the source sound. To get the most from multi channel surround sound Position your speakers and do the procedures described in "Multi channel surround setup" starting from page 10 before you customize a sound field. The SUR menu contains parameters that let you customize various aspects of the current sound field. [. . . ] There is no sound from the center speaker. "DAILY 1", "DAILY 2", or "REC SELECT" does not appear when you press TIMER SELECT (or CLOCK/TIMER SELECT on the remote). Set the center speaker level to the appropriate level. ⷠMake sure the center speaker selection parameter in the "SP. [. . . ]