User manual SONY MHC-RXD9

[. . . ] Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. Don't throw away the battery with general house waste, dispose of it correctly as chemical waste. 7 Inserting two R6 (size AA) batteries into the remote . As an ENERGY STAR® Partner, Sony Corporation has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. [. . . ] Press REC PAUSE/START, and then start playing the desired source to record. You cannot listen to other sources while recording. If you want to record from the reverse side, press TAPE A/B to select deck B after step 1. Press hH to start playback of the reverse side, then press x when you want to start recording. When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side. ⷠFor recording from the radio: If noise is heard while recording from the radio, move the respective antenna to reduce the noise. When programing, make sure the playing time for each side do not exceed the length of one side of the tape. To check the required tape length for recording a CD, press EDIT until "EDIT" flashes after you have loaded CD and pressed CD. The required tape length for the currently selected CD appears, followed by the total playing time for side A and side B respectively (Tape Select Edit). You cannot use Tape Select Edit for discs containing over 20 tracks. When you select other sound effect, the surround effect will be canceled. This setting is automatically stored as the personal file you selected in step 3. The demonstration display (display window and buttons lighting and flashing even when the system power is off) and the clock display can be turned off to minimize the amount of power consumed during standby (Power Saving Mode). Press DISPLAY repeatedly while the system is off until the demonstration display or the clock display disappears. Each time you press the button, the display changes cyclically as follows: Elapsed playing time on the current track t Remaining time on the current track t Remaining time on the current CD (1DISC mode) or "­ ­. Each time you press the button, the display switches cyclically as follows: Demonstration display t Clock display* t No display (Power Saving Mode) * The clock is displayed only if you set the clock. Each time you press the button, the display changes cyclically as follows: Total number of tracks and total playing time t Clock display (for eight seconds) t Effect status You need to connect a video game machine (see "Hooking up optional components" on page 29). Mixing video game sound with other sound source Each time you press the button, the level of the game sound changes cyclically as follows: MIXING LOW t MIXING MID t MIXING HIGH t MIXING OFF These operations cannot be performed in the Power Saving Mode. The GAME MIXING indicator lights up while Game Mixing is activated. ⷠOnce Game Mixing is activated, it will remain active while the power is on even if the source sound is changed. Each time you press the button, the display changes as follows: PATTERN 1 t PATTERN 2* t PATTERN 3 t PATTERN OFF (No display) * "PATTERN 2" may not be displayed according to the audio signal. [. . . ] If you have any questions or problems concerning your stereo system, please consult your nearest Sony dealer. The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned off. ⷠUnplug the system from the wall outlet (mains) if it is not to be used for an extended period of time. To disconnect the cord (mains lead), pull it out by the plug. [. . . ]