User manual SONY MHC-V818

[. . . ] 3-862-902-12(1) Mini Hi-Fi Component System Operating Instructions MHC-V818 ©1998 by Sony Corporation 1 WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. This system can play the following discs VIDEO CDs Audio CDs Disc logo Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. Laser component in this product is capable of emitting radiation exceeding the limit for Class 1. This appliance is classified as a CLASS 1 LASER product. [. . . ] To display previous tracks, press PREV. 1 2 3 Start playing the VIDEO CD track you want. Press 4 to select "4) TRACK DIGEST. " The current track is divided into 9 sections (in default setting) and the first frame of each section is displayed. The sound of the first three seconds of each track on an audio CD plays, but there is no sound when using a VIDEO CD. Current track number TRACK 1 DIGEST To switch to the digest of another disc during disc digest Press D. SKIP during disc digest. To use disc digest with VIDEO CDs with PBC functions (Ver. 2. 0) Select "3) DISC DIGEST" before you start playing the VIDEO CD, to light the PBC OFF indicator and play without PBC functions. Tips · In step 2, you can select tracks even if they have not been displayed yet. Use the numeric buttons to select the track you want. · In step 2, you can play the track you want immediately after the first frame is displayed by pressing CD (. 1 4 7 2 5 8 3 6 9 Notes · Video images will not be shown for audio CDs. · The play mode automatically switches to normal mode if you start disc digest during Shuffle or Program Play. 4 Press the numeric buttons to select the section you want. Playback starts from a point near the selected frame. To stop playback Press p. continued 33 Locating a specific part of a disc (continued) To switch to a 12 frame display You can switch the digest display from 9 to 12 frames. 3 Proceed with steps 2 and 3 of "Locating a section within a track". The track is divided into 12 sections and the first frame of each section is displayed. To switch back to the 9 frame display, repeat this operation. Resuming playback from the point you stopped a VIDEO CD ­­ Resume Play The unit memorizes the point where you stopped the VIDEO CD so you can resume from that point. Resume play is not cancelled when you turn off the system. Note that resume play is not available when playing an audio CD. To switch to the digest of another track during track digest Press PREV or NEXT during track digest; however, this does not work during Shuffle Play or Program Play. (Power) 1 2 To use track digest with VIDEO CDs with PBC functions (Ver. 2. 0) Select "4) TRACK DIGEST" before you start playing the VIDEO CD, to light the PBC OFF indicator and play without PBC functions. Tips · In step 3, you can select sections even if they have not been displayed yet. Use the numeric buttons to select the track you want. · In step 3, you can play the section you want immediately after the first frame is displayed by pressing CD (. Note Tracks less than 40 seconds long may be divided into fewer than 12 sections. CD ( p 34 1 While playing a VIDEO CD, press p to stop playback. "RESUME" appears on your TV screen. If "RESUME" does not appear, Resume Play is not available. Setting the sharpness ­­ Active Picture This function emphasizes the outline of the picture to create a sharper image. (Power) ACTIVE 2 Press CD (P (or CD ( on the remote). The player starts playback from the point you stopped the VIDEO CD in step 1. zTo view from the beginning of the VIDEO CD When "RESUME" appears in the display, press p, then press CD (P (or CD (). Notes · Resume Play is not available in the Digest, Shuffle, or Program Play modes. · Depending on where you stopped the VIDEO CD, the player may resume playback from a different point. · The point at which you stopped playback is cleared when: ­ you press number buttons, PLAY MODE, or p. ­ you press DISC SKIP/EX-CHANGE (or D. SKIP on the remote). [. . . ] All the settings you made, such as the preset stations, clock, and timer are cleared. You should set them again. 60 Specifications Amplifier section The following measured at AC 120, 220, 240 V 50/60Hz DIN power output (rated) 105 + 105 watts (8 ohms at 1 kHz, DIN) Continuous RMS power output (reference) 130 + 130 watts (8 ohms at 1 kHz, 10% THD) Peak music power output (reference) 2000 watts Inputs VIDEO (AUDIO) IN (phono jacks): voltage 250 mV, impedance 47 kilohms MD IN (phono jacks): voltage 450 mV, impedance 47 kilohms MIC 1/2 (phone jack): sensitivity 1 mV, impedance 10 kilohms Outputs MD OUT (phono jacks): voltage 250 mV impedance 1 kilohms VIDEO OUT (phono jack):max. output level 1Vp-p, unbalanced, Sync negative, load impedance 75 ohms S-VIDEO OUT (4-pin/mini-DIN jack): Y: 1Vp-p, unbalanced, Sync negative, C: 0. 286Vp-p, load impedance 75 ohms PHONES (stereo phone jack): accepts headphones of 8 ohms or more SPEAKER: accepts impedance of 8 to 16 ohms SURROUND SPEAKER: accepts impedance of 16 ohms SUPER WOOFER: Voltage 1 V, impedance 1 kilohm VIDEO CD/CD player section System Laser Compact disc and digital audio and video system Semiconductor laser (=780nm) Emission duration: continuous Max. 44. 6 µW* *This output is the value measured at a distance of 200 mm from the objective lens surface on the Optical Pick-up Block with 7 mm aperture. [. . . ]