User manual SONY MHC-VX333

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. To prevent fire, do not Cover the ventilation of the apparatus with news papers, table-cloths, curtains, etc. and don't place lighted candles on the apparatus. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. [. . . ] Searching for the beginning of the current or the next track (AMS)*1 To go forward Press > during playback when N lights in the display. During playback when n lights in the display. During playback when N lights in the display. "TAPE A (or TAPE B) <<< ­1" appears. Press > during playback when n lights in the display. *1 The deck stops automatically after repeating the sequence five times. for MHC-VX222 , deck A doesn't play the reverse side. The program step number appears, followed by the total playing time. Skip step 4 to select tracks from the same disc. Deck B stands by to record in the direction of the indication on hH (the right indication lights to record on the forward side and the left indicator lights to record on the reverse side). Press v or V repeatedly to set the hour, then press B. You can reinforce the bass and create a more powerful sound. Each time you press the button, the display changes cyclically as follows: GROOVE ON* t V-GROOVE ON* t GROOVE OFF * The volume switches to power mode, the equalizer curve changes, and the "GROOVE" indicator lights up. When the recording starts, the volume level is set to minimum. Selecting the effect from the music menu Press MUSIC EQ, MOVIE EQ or GAME EQ repeatedly to select the preset you desire. When you use the Sleep Timer, Daily Timer and Timer recording will not turn on the system until the Sleep Timer turns it off. You can adjust the sound by raising or lowering the levels of specific frequency ranges, then store up to three personal files (P FILE) in the memory. Select the audio emphasis you want for your basic sound first. "SURR" appears if you select an effect with surround effects. PlayStation 1, 2 and other video game music sources This setting is automatically stored as the personal file you selected in step 3. You need to connect a video game machine (see "Connecting a video game machine" on page 30). Each time you press the button, the display changes as follows: C. [. . . ] If other troubles not described above occur, reset the system as follows: MHC-VX333 The following measured at AC 120, 220, 240 V 50/60 Hz DIN power output (rated) 100 + 100 watts (6 ohms at 1 kHz, DIN) Continuous RMS power output (reference) 120 + 120 watts (6 ohms at 1 kHz, 10% THD) MHC-VX222 The following measured at AC 120, 220, 240 V 50/60 Hz DIN power output (rated) 50 + 50 watts (6 ohms at 1 kHz, DIN) Continuous RMS power output (reference) 60 + 60 watts (6 ohms at 1 kHz, 10% THD) Inputs MD/VIDEO (AUDIO) IN (phono jacks): voltage 450/250 mV, impedance 47 kilohms GAME (AUDIO) IN (phono jack): voltage 450 mV, impedance 47 kilohms MIC 1/2 (mini jack): sensitivity 1 mV, impedance 10 kilohms Outputs MD/VIDEO (AUDIO) OUT (phono jacks): voltage 250 mV impedance 1 kilohms VIDEO OUT (phono jack): max. Output level 1Vp-p, unbalanced, Sync negative, load impedance 75 ohms S-VIDEO OUT (4-pin/mini-DIN jack): Y: 1Vp-p, unbalanced, Sync negative, C: 0. 286Vp-p, load impedance 75 ohms PHONES (stereo mini jack): accepts headphones of 8 ohms or more SPEAKER: accepts impedance of 6 to 16 ohms 2 Plug the power cord back in. One of the following messages may appear or flash in the display during operation. [. . . ]