User manual SONY MHC-VX7

[. . . ] Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. The following caution label is located inside the unit. This reminder is provided to call CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] The player starts playing the disc in the PLUS ONE slot. The disc number in the display changes to 51 and you can play the disc as the 51st disc. You can delete unwanted tracks and store only the tracks you want. When you select the disc containing a Delete Bank, you can play only the remaining tracks. "OFF" appears next to the track number. If you want to restore the track, press CLEAR again so that "ON" appears next to the track number. Repeat Step 3 and 4 to delete more tracks. 2 Hold down CLEAR until "ALL ON" appears in the display. tip The deleted tracks are skipped even in the Shuffle or Program Play mode (when the whole disc containing a Delete Bank is programmed as one step). Press CHECK repeatedly until the track you want to delete appears in the display. You can file the discs into different groups and then play the grouped discs. Turn the jog dial until the disc number to which you want to label appears. When you label a disc with the front cover closed, the disc number of the disc at the playing position appears. When you label a disc with the front cover open, the disc number at the loading position appears. Repeat Steps 2 to 8 to label other discs or groups. The Disc Memo stores the number of the slot in which the CD was inserted. Re-enter the Disc Memo when inserting a new CD into that slot. Follow Steps 1 through 4 of "Labeling a CD" on page 33 to select the Disc Memo you want to erase. You can locate a disc you want to play quickly by scanning the Disc Memos (see page 33) in the display and starting playback. Note that you cannot use this function in the ALL DISCS Shuffle Play mode. When you replace a disc with a CD-TEXT disc, the Disc Memo of the CD-TEXT disc is restored automatically. The Disc Memo for the CD-TEXT disc is no longer stored (disappears) each time the CD is removed. [. . . ] (MHC-F250AV only) The software being played back has limited sound effects. Move the stereo system away from the TV or VCR. DAILY 1, DAILY 2, and REC do not appear when you press the TIMER SELECT button. There is an obstacle between the remote and the system. [. . . ]