User manual SONY MHC-WZ50

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. To prevent fire, do not cover the ventilation of the apparatus with news papers, table-cloths, curtains, etc. and don't place lighted candles on the apparatus. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. [. . . ] Each time you press the button, the minute display (the turn-off time) changes cyclically as follows: OFF t AUTO* t 90min t 80min t 70min t . t 10min * The system automatically turns off in 100 minutes or after the current disc or tape finishes playing. To start from a specific track, make a program (see "Creating your own program" on page 10). Remaining time** Change the time to turn off Press SLEEP repeatedly to select the time you want. ** You cannot check the remaining time if you select "AUTO". You can use the Sleep Timer, even if you have not set the clock. Or > repeatedly to set the hour, then press ENTER. Set the time to stop playing following the same procedure as step 5. Or > repeatedly until the desired sound source appears. Each time you press the button, the display changes cyclically as follows: The start time, the stop time, and the sound source appear in turn, before the original display returns. You can record a preset radio station from a specified time. To timer record, you must first preset the radio station (see "Presetting radio stations" on page 12) and set the clock (see "Setting the clock" on page 8). You cannot use the optional component connected to MD (VIDEO) IN jacks as the sound source for Daily Timer. The system turns on 15 seconds before the preset time. Or > repeatedly to set the hour, then press ENTER. Set the time to stop recording following the same procedure as step 4. , "FM20 t TAPE") appear in turn, before the original display returns. The demonstration display (display window and buttons lighting and flashing even when the system power is off) and the clock display can be turned off to minimize the amount of power consumed during standby (Power Saving Mode). Press DISPLAY repeatedly while the system is off until the demonstration display or the clock display disappears. Do not operate the system from the time the system turns on until the recording starts (about 15 seconds before the preset time). ⷠNote that if the Timer Recording is set at the same time as the Daily Timer sound source is set to tape, the Timer Recording sound may be recorded onto the tape. Each time you press the button, the display switches cyclically as follows: Demonstration display t Clock display* t No display (Power Saving Mode) * "­ ­:­ ­" appears if you have not set the clock. [. . . ] The following types of disc should not be used: ­ Rental or used discs with attached seals where the glue extends beyond the seal. the perimeter of the seal on the disc is tacky. ­ Discs that have labels printed using a special ink that feels tacky when touched. , heart, square, star) cannot be played on this unit. [. . . ]