User manual SONY MHC-WZ88D

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. To prevent fire, do not cover the ventilation of the apparatus with newspapers, table-cloths, curtains, etc. and don't place lighted candles on the apparatus. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. [. . . ] 10 Press ENTER when you have finished Speaker level for other speakers. When you adjust the speaker settings, the sound may cut off for a moment. You can then tune in any of those stations simply by selecting the corresponding preset number. The stations are stored from preset number 1. You can automatically tune in all of the stations that can be received in your area and then store the frequency of your favourite stations manually. Repeat steps 1 to 6 to store other stations. Press FUNCTION +/­ repeatedly until "TUNER FM" or "TUNER AM" appears in the display (or press TUNER/BAND on the unit repeatedly to select "FM" or "AM"). Press and hold TUNING +/­ until the frequency indication starts to change. You can manually tune in and store the frequency of your favourite stations. Scanning stops automatically when a station is tuned in. "TUNED" lights up in the display. When a FM stereo program is tuned in, "STEREO" lights up in the display. Press FUNCTION +/­ repeatedly until "TUNER FM" or "TUNER AM" appears in the display (or press TUNER/BAND on the unit repeatedly to select "FM" or "AM"). If "TUNED" does not light up and the scanning does not stop The stations are stored from preset number 1. The preset stations are retained for half a day even if you unplug the power cord or if a power failure occurs. If you press TUNER/BAND on the unit while the system is turned off, the system turns on automatically and "TUNER" is selected as the function except during Power Saving Mode. Repeat steps 1 to 6 to store other stations. Tune in a station with a weak signal Stop scanning during automatic tuning Cancel presetting Use the buttons on the unit for the operation. The factory settings for AM tuning interval is 9 kHz (or 10 kHz for some areas). To change the AM tuning interval, select any AM station first, then turn off the system. When you change the interval, all the AM preset stations are erased. You can listen to a radio station either by selecting a preset station, or by manually tuning in the station. [. . . ] Each region code is shown on the unit as well as on the disc packaging. The system can play back the discs that match its region code. The system can also play back discs with the " " mark. Even when the region code is not shown on the DVD VIDEO, the region limit may still be activated. [. . . ]