User manual SONY MHC-ZX30AV

[. . . ] 4-227-889-12(1) Mini Hi-Fi Component System Operating Instructions MHC-ZX30AV ©2000 Sony Corporation WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. This appliance is classified as a CLASS 1 LASER product. [. . . ] Press REC PAUSE/START. Deck B stands by for recording. The TAPE B N indicator (for front side) lights. 28 Tips · If you want to record from the reverse side, press TAPE B n to light its indicator after pressing REC PAUSE/START in step 3. · When you want to reduce the hiss noise in low-level high-frequency signals, do the following procedure after pressing REC PAUSE/START in step 3. 1 Press MODE SELECT repeatedly to select "Set Up Mode", then press PUSH ENTER. 2 Move the multi stick toward b or B repeatedly to select "TAPE Set Up ?", then press PUSH ENTER. 3 Move the multi stick toward b or B repeatedly to select "DOLBY NR Set Up ?", then press PUSH ENTER. 4 Move the multi stick toward b or B repeatedly to select "On", then press PUSH ENTER. "DOLBY NR" appears in the display. To return to the original setting, repeat steps 1 through 4 and select "Off" in step 4. · When recording from a CD, you can use . or > to select tracks during rec pause mode (after pressing REC PAUSE/START in step 3 and before pressing again in step 8). Recording a CD by specifying track order -- Program Edit You can record tracks from all the CDs in the order you want. When programming, make sure the playing times for each side do not exceed the length of one side of the tape. ?/1 (Power) The CD Player Deck The Tape 2 12 x 3, 13 17 11 Multi stick PUSH ENTER H hH hH . m > M x X 10 continued 29 Recording a CD by specifying track order (continued) 9 1 2 3 4 5 6 Place a CD and insert a recordable tape into deck B. Press FUNCTION repeatedly until "CD" appears in the display. Press MODE SELECT repeatedly to select "Set Up Mode", then press PUSH ENTER. Move the multi stick toward b or B repeatedly to select "CD Set Up ?", then press PUSH ENTER. Move the multi stick toward b or B repeatedly to select "Program Set ?", then press PUSH ENTER. Move the multi stick toward v or V repeatedly to select a CD. If you want to program all the tracks on a CD at once, select a CD in this step, then skip step 7 and continue with step 8. To program additional tracks to be recorded on side A, repeat steps 6 through 8. Skip step 6 to select tracks from the same disc. 10 Press X on the remote to insert a pause at the end of side A. "P" appears in the display and the total playing time resets to "0m00s" in the display. 11 Repeat steps 7 and 8 for tracks from the same disc or steps 6 to 8 for tracks from another disc to program the remaining tracks to be recorded on side B. 12 Press CD SYNC. Deck B stands by for recording and the CD player stands by for playback. The TAPE B N indicator (for front side) lights and the REC PAUSE/START button flashes. 13 Press MODE SELECT repeatedly to select "Set Up Mode", then press PUSH ENTER. 7 Move the multi stick toward b or B repeatedly to select the desired track. Disc number Track number PROGRAM 14 Move the multi stick toward b or B repeatedly to select "TAPE Set Up ?", then press PUSH ENTER. Total playing time (including selected track) 8 Press PUSH ENTER. The track is programmed. When all the tracks are selected, "AL" appears in the display and all the tracks are programmed as one step. The program step number appears, followed by the total playing time. 30 15 Move the multi stick toward b or B repeatedly to select "Direction Set Up ?", then press PUSH ENTER. Tip When you want to reduce the hiss noise in low-level high-frequency signals, do the following procedure after pressing CD SYNC in step 12 in the previous page. 1 Press MODE SELECT repeatedly to select "Set Up Mode", then press PUSH ENTER. [. . . ] 1. 0 kg net per speaker Additional Information Design and specifications are subject to change without notice. Center Speaker (SS-CT170): Speaker system 1-way, 1-unit, bass-reflex type, magnetically shielded 8 cm, cone type 8 ohms Approx. 1. 1 kg net Speaker units Full-range: Nominal impedance Dimensions (w/h/d) Mass For the customers in Canada Use only the supplied SS-RS170P rear surround speaker for connection to the REAR SPEAKER connector, the supplied SS-CT170 center surround speaker for connection to the CENTER SPEAKER connector on the MHC-ZX30AV. 59 Parts Identification for the remote You can also operate the system with the supplied remote. *: You can operate with the remote only. TAPE Remote Button(s) Function TAPE A hH Starts playback. TAPE B hH Each time you press this button, the tape reverses direction. [. . . ]