User manual SONY MHC-1200

[. . . ] To prevent fire, do not Cover the ventilation of the apparatus with news papers, table-cloths, curtains, etc. and don't place lighted candles on the apparatus. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. [. . . ] To play the same program again, press CD, then press H (or N on the remote). --" appears when the total CD program time exceeds 100 minutes, or when you select a CD track whose number is 21 or over. Or + on the remote) until the frequency indication starts to change, then release it. You can check the remaining time of the current track or the entire CD. During normal play Scanning stops automatically when the system tunes in a station. Playing time of the current track t Remaining time of the current track t Remaining time of current CD t Clock display (for eight seconds) t Effect status The stations are stored from preset number 1. During Program Play mode when there is a program: The last track number of the program and the total playing time t Total number of programed tracks (for eight seconds) t Clock display (for eight seconds) t Effect status To tune in a station with a weak signal To set another station to an existing preset number Or > (or PRESET ­ or + on the remote) repeatedly to select the preset number you want to store the other station. You can preset a new station in the selected preset number. Remote until a preset number appears in the display. When you erase a preset number, the preset number decreases by one and all preset numbers following the erased one are renumbered. Use manual or automatic tuning in step 2. You can reinforce the bass and create a more powerful sound. "SURR" appears if you select an effect with surround effects. Selecting the effect from the music menu Press MUSIC EQ, MOVIE EQ or GAME EQ (or EQ +/­* on the remote) repeatedly to select the preset you desire. PlayStation 1, 2 and other video game music sources You need to connect a video game machine (see "Connecting a video game machine" on page 19). You can wake up to music at a preset time. Make sure you have set the clock (see "Setting the time" on page 9). 1 Prepare the music source you want to These operations cannot be performed in the Power Saving Mode. To start from a specific track, make a program (see "Programing CD tracks" on page 11). ⷠTape: Load a tape with the side you want to play facing forward. Falling asleep to music -- Sleep Timer You can set the system to turn off after a certain time, so that you can fall asleep to music. Each time you press the button, the minute display (the turn-off time) changes cyclically as follows: AUTO* t 90 MIN t 80 MIN t 70 MIN t . [. . . ] To avoid burning yourself, do not touch the cabinet. If the system is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lens inside the CD player. Should this occur, the system will not operate properly. Remove the CD and leave the system turned on for about an hour until the moisture evaporates. [. . . ]