User manual SONY MHC-2750

[. . . ] Refer servicing to qualified personnel only. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. This appliance is classified as a CLASS 1 LASER product. The CLASS 1 LASER PRODUCT MARKING is located on the rear exterior. CAUTION NOTICE FOR THE CUSTOMERS IN THE U. S. A. This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] When 4 digits are displayed, they represent the language code (see the language code list on page 64). When the same language is displayed two or more, the DVD is recorded in multiple audio formats. x When playing a VIDEO CD or CD Current playing program format** * "PCM", "MPEG", "DTS", or "DOLBY DIGITAL" is displayed. For "DOLBY DIGITAL", the channels in the playing track are displayed numerically as follows: For Dolby Digital 5. 1 ch: Rear component 2 · STEREO: The standard stereo sound. · 1/L: The sound of the left channel (monaural). · 2/R: The sound of the right channel (monaural). 4 Press ENTER. To turn off the Control Menu DOLBY DIGITAL 3 / 2 . 1 Front component 2 + Center component 1 LFE (Low Frequency Effect) component 1 Press DVD DISPLAY repeatedly until the Control Menu is turned off. 32 ** The letters in the program format display mean the following sound component: L: Front (left) R: Front (right) C: Center LS: Rear (left) RS: Rear (right) S: Rear (monaural): The rear component of the Dolby Surround processed signal or the Dolby Digital signal. LFE: LFE (Low Frequency Effect) Note When the signal contains rear signal components such as LS, RS, or S, the DSP effect is enhanced (page 48). DVD/VIDEO CD/CD The display examples are as follows: · PCM (stereo) PROGRAM FORMAT PCM 48kHz 24bit · Dolby Surround PROGRAM FORMAT DOLBY DIGITAL 2/0 DOLBY SURROUND L C R S · Dolby Digital 5. 1ch When an LFE signal component is output, "LFE" is enclosed in a solid line. When an LFE signal component is not output, "LFE" is enclosed in a broken line. PROGRAM FORMAT DOLBY DIGITAL 3/2. 1 L LS C LFE RS R · DTS "LFE" is always enclosed in a solid line regardless of the LFE signal component being output. PROGRAM FORMAT DTS 3/2. 1 L LS C LFE RS R 33 Enjoying movies Searching for a title/ chapter/track/index/scene You can search a DVD disc by title or chapter, and you can search a VIDEO CD or CD by track, index, or scene. As titles and tracks are assigned unique numbers on the disc, you can select the desired one by entering its number. Or, you can search for a scene using the time code (TIME SEARCH). To search for a scene using the time code (TIME SEARCH) (DVD only) 1 In step 3, select "TIME/TEXT". "T **:**:**" (playing time of the current title) is selected. 2 Press ENTER. "T **:**:**" changes to "T --:--:--". 1 Press DVD. 2 Press DVD DISPLAY. The Control Menu appears. 3 Input the time code using the numeric buttons, then press ENTER. For example, to find the scene at 2 hours, 10 minutes, and 20 seconds after the beginning, just enter "2:10:20". To turn off the Control Menu 3 Press v or V repeatedly to select the search method. The display for entering the password appears. The area is selected. When you select "OTHERS t", select and enter the standard code in the table on page 39 using the numeric buttons. 2 Follow step 3 to enter a new password. 7 Press ENTER. The options for "LEVEL" appears. CUSTOM SETUP PARENTAL CONTROL LEVEL: STANDARD: CHANGE PASSWORD OFF OFF 8: 7: 6: 5: NC17 R 38 Playing the disc for which Parental Control is set Area code Standard Code Standard number Code number 1 Insert the disc and press nN. The "PARENTAL CONTROL" display appears. Argentina Australia Austria Belgium Brazil Canada Chile China Denmark Finland France Germany Hong Kong India Indonesia Italy Japan 2044 2047 2046 2057 2070 2079 2090 2092 2115 2165 2174 2109 2219 2248 2238 2254 2276 Korea Malaysia Mexico Netherlands New Zealand Norway Pakistan Philippines Portugal Russia Singapore Spain Sweden Switzerland Taiwan Thailand 2304 2363 2362 2376 2390 2379 2 Enter your 4-digit password using the numeric buttons, then press ENTER. The playback starts. Tip DVD/VIDEO CD/CD 2427 2424 2436 2489 2501 2149 2499 2086 2543 2528 If you forgot your password, remove the disc and repeat steps 1 to 5 of "Limiting playback by children". When you are asked to enter your password, enter "199703" using the numeric buttons, then press ENTER. The display will ask you to enter a new 4-digit password. After you enter a new 4-digit password in step 3, replace the disc in the system and press nN. When the "PARENTAL CONTROL" display appears, enter your new password. Notes · When you play DVDs which do not have the Parental Control function, playback cannot be limited on this system. · Depending on the DVD, you may be asked to change the parental control level while playing the disc. In this case, enter your password, then change the level. If the Resume Play mode is canceled, the level returns to the original level. United Kingdom 2184 39 Tuner Presetting radio stations You can preset 20 stations for FM and 10 stations for AM. To change the AM tuning interval (Except for European and Middle Eastern models) 1 Press TUNER/BAND repeatedly to select FM or AM. 2 Press and hold m or M until the frequency indication starts to change, then release. The AM tuning interval is factory set to 9 kHz (10 kHz in some areas). To change the AM tuning interval, tune in any AM station first, then turn off the power. While holding down the ENTER button, turn the power back on. [. . . ] Sounds outside the range of human hearing are compressed while the sounds we can hear are not compressed. VIDEO CDs can hold 6 times the audio information of conventional audio CDs. There are 2 versions of VIDEO CDs. Additional Information This system is used to protect copyrights. A region number is allocated on each DVD system or DVD disc according to the sales region. [. . . ]