User manual SONY MHC-C33

[. . . ] As the main plug is used to disconnect the unit from the mains, connect the unit to an easily accessible AC outlet. Should you notice an abnormality in the unit, disconnect the main plug from the AC outlet immediately. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. Do not expose batteries or apparatus with battery-installed to excessive heat such as sunshine, fire or the like. [. . . ] · The playback order for the system may differ from the playback order of the connected digital music player. · Be sure to turn off the system before removing the USB device. Removing the USB device while the system is turned on may corrupt the data on the USB device. To change the play mode Press PLAY MODE on the remote repeatedly when playback is stopped. You can select the following play mode. Select To play back ALL USB (Normal Play) 1 USB (Normal Play) The audio files on all USB devices in original order. The audio files on the USB device you have selected in original order. The audio files in the folder on the USB device you have selected in original order. (Normal Play) ALL USB SHUF* The audio files on all USB devices in random (Shuffle Play) order. Continued l 27GB · Do not save other types of files or unnecessary folders on an USB device. · Folders that have no audio files are skipped. · The system can recognize up to ­ 1000 folders (including "ROOT" and "MUSIC" folder). ­ 150 audio files on a single folder. ­ 8 folder levels (tree structure of files). The maximum number of audio files and folders may vary depending on the file and folder structure. Return to the previous menu item Press TOOL MENU or B or O RETURN on the remote. You can return to the previous menu or select a menu of the iPod. Note You can confirm menu and item selections on the iPod screen during operation. TOOL MENU or MENU O RETURN or B on the remote ENTER (or on the remote) Center button. · Press and hold V or v on the remote has the similar function of turning the Click Wheel on the iPod clockwise or counterclockwise. To use the system as a battery charger You can use the system as a battery charger for the iPod when the system is on. The charging begins when the iPod is connected to the USB ports. The charging status appears in the iPod screen. For details, see the operating instructions of your iPod. To stop charging the iPod Remove the iPod. When the system is turned off, the charging is stopped. 29GB Using optional audio components 1 Connect an optional audio component to the PC IN L/R jacks using an audio cord (not supplied). Adjusting the sound To add a sound effect To Do this 2 Turn MASTER VOLUME (or press VOLUME ­ on the remote) to turn down the volume. Reinforce the bass and create a more powerful sound Select the surround effect Press GROOVE repeatedly until "GROOVE"1) or "Z-GROOVE"1) lights up in the display. Press SURROUND repeatedly until "SURROUND" lights up in the display. Press PRESET EQ (or EQ on the remote) repeatedly. To cancel, press PRESET EQ (or EQ on the remote) repeatedly until "FLAT" appears. 3 Press to select PC function. Press FUNCTION (RM-AMU053) or FUNCTION +/­ (RM-AMU054) repeatedly. Select a preset sound effect 4 Start playing the connected component. 5 Turn MASTER VOLUME (or press VOLUME +/­ on the remote) to adjust the volume. Enhance the Press OPTIONS and turn sound quality of OPERATION DIAL to the audio file2) select "MP3 BOOSTER+", then press ENTER. Turn OPERATION DIAL to select "AUTO", then press ENTER. 3) 1) The volume switches to power mode and the equalizer curve changes. [. . . ] In this situation, turn off the TV, wait 15 to 30 minutes, and turn it back on. If there is no improvement, move the speakers far away from the TV. Cleaning the cabinet Clean this system with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent, such as thinner, benzine, or alcohol. On safety · The unit is not disconnected from the mains as long as it is connected to the AC outlet, even if the unit itself has been turned off. · Completely disconnect the power cord (mains lead) from the wall socket (mains) if it is not going to be used for an extended period of time. [. . . ]