User manual SONY MHC-C55

[. . . ] Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. The following caution label is located inside the apparatus. Don't throw away the battery with general house waste, dispose of it correctly as chemical waste. Except for European model As an ENERGY STAR® partner, Sony Corporation has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. [. . . ] If you select "j" or "RELAY", the deck stops automatically after repeating the sequence five times. You cannot use Tape Select Edit for discs containing over 20 tracks or MP3 files. the recording level is adjusted automatically. Use buttons on the CD player for the operation. When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side. ⷠIf you select both sides recording and the tape reaches the end of the front side part-way through a track, the entire track is recorded again from the beginning of the reverse side. Press CD and load a disc you want to record. Select "j" (or "RELAY") to record on both sides. To record a disc by specifying track order You can record only your favorite CD tracks using Program Play. Between steps 2 and 3, perform steps 1 to 5 of "Creating your own program" (page 10). Each time you press the button, the display switches cyclically as follows: Demonstration display t Clock display* t No display (Power Saving Mode) * "­ ­:­ ­" appears if you have not set the clock. You cannot perform the following operations in Power Saving Mode. Each time you press the button, the display changes cyclically as follows: You can check the playing time and remaining time of the current track or that of the disc. When a CD-TEXT disc or a disc with MP3 audio tracks is loaded, you can also check the information recorded on disc, such as the titles. When the unit detects CD-TEXT discs, the "CD TEXT" indication appears in the display. TOC display*1 or total album number of the disc*2 or total track number of the current album*3 t Disc title*4 or volume label*5 or album name*5 t Clock display (for eight seconds) t Effect status (for eight seconds) *1 TOC = Table of Contents; displays total number of tracks on the disc, and total playing time of the disc *2 For discs with MP3 audio tracks in Normal play or SHUF mode *3 For discs with MP3 audio tracks in ALBM or ALBM SHUF mode *4 For discs with CD-TEXT *5 For discs with MP3 audio tracks, album titles or volume label may not be displayed depending on the play mode Depending on the disc, some CD-TEXT information may not appear. Each time you press the button, the display changes cyclically as follows: Current track number and elapsed playing time t Current track number and remaining time or "­ ­. ⭠­"*1 t Remaining time of the disc or "­ ­. ­ ­"*1 t Track title (CD-TEXT disc or disc with MP3 audio tracks*2 only) t Album name (disc with MP3 audio tracks only) t Clock display (for eight seconds) t Effect status (for eight seconds) *1 For discs with MP3 audio tracks *2 When you play back a track with an ID3 tag ver. The ID3 tag displays only the track title information. The last track number of the program and the total playing time t Total track number of the program (for five seconds) t Disc title*1 or volume label*2 t Clock display (for eight seconds) t Effect status *1 For discs with CD-TEXT *2 For discs with MP3 audio tracks The level meter in the display shows changes in audio source input levels and volume setting. [. . . ] ⷠDo not use discs encircled with a protection ring. When using discs that have glue or similar tacky substance on the label side of the disc or that used a special ink when the label was printed, there is a chance that the disc or label may become attached to parts inside this unit. When this occurs, it may not be possible to remove the disc, and may also cause this unit to malfunction. Be sure to check that the label side of the disc is not sticky before using. [. . . ]