User manual SONY MHC-RG70AV

[. . . ] 4-235-231-11(1) Mini Hi-Fi Component System Operating Instructions Owner's Record The model and serial numbers are located on the rear panel of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Serial No. MHC-RG70AV/DX60AV © 2001 Sony Corporation 1 WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. [. . . ] 3 Insert a tape in deck A or B with the side you want to play/record facing forward. With the side you want to play/record facing forward. Searching for the beginning of the current or the next track (AMS)* To go forward Press > during playback when N lights in the display. "TAPE A (or TAPE B) >>> +1" appears. during playback when n lights in the display. "TAPE A (or TAPE B) <<< +1" appears. To go back Playing a tape You can use TYPE I (normal) tape. 1 Load a tape. 2 Press DIRECTION repeatedly to select g to play one side. Select j* to play both sides. Press . during playback when N lights in the display. "TAPE A (or TAPE B) <<< ­1" appears. Press > during playback when n lights in the display. "TAPE A (or TAPE B) >>> ­1" appears. * AMS (Automatic Music Sensor) Tip To play both decks in succession, select "RELAY" (Relay Play)**. 3 Press hH (or nN on the remote). Press hH (or nN on the remote) again to play the reverse side. The tape starts playing. Tape presence indicator When a tape is inserted, corresponding forward/ reverse indicators light. Note The AMS function may not operate correctly under the following circumstances: ­ When the unrecorded space between songs is less than 4 seconds long. ­ When the system is placed near a television. Reverse indicator Forward indicator * The deck stops automatically after repeating the sequence five times. ** Relay Play always follows this cyclic sequence up to five times, then stops: Deck A (front side) t Deck A (reverse side) t Deck B (front side) t Deck B (reverse side) 16 Recording to a tape -- CD Synchro Recording/Recording Manually/Program Edit You can record from a CD, tape or radio. The recording level is adjusted automatically. Steps Recording from a CD (CD Synchro Recording) Load a recordable tape into deck B. Load the CD or tape, or tune in the station you want to record. Recording from a CD/tape/radio manually 1 2 3 4 5 6 Tape Deck B stands by for recording. REC PAUSE/START button flashes. Press DIRECTION repeatedly to select g to record on one side. Select j (or RELAY) to record on both sides. Press REC PAUSE/START, and then start playing the desired source. To stop recording Note Press x. Tips You cannot listen to other sources while recording. continued · If you want to record from the reverse side, press TAPE A/B to select deck B after step 1. Press hH (or nN on the remote) to start playback of the reverse side, then press x to start recording. · When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side. [. . . ] Redo the following: -- "Setting the time" on page 9 -- "Presetting radio stations" on page 13 If you have set the timer, also redo "Waking up to music" on page 23 and "Timer-recording radio programs" on page 18. There is no sound. · Turn off the TV set once, then turn it on after 15 to 30 minutes. If the color irregularity still persists, place the speakers farther away from the TV set. "PROTECT" and "PUSH POWER" appear alternately. · Turn VOLUME clockwise (or press VOL + on the remote). · Insert only the stripped portion of the speaker cord into the SPEAKER jack. Inserting the vinyl portion of the speaker cord will obstruct the speaker connections. [. . . ]