User manual SONY MHC-RXD2

[. . . ] Refer servicing to qualified personnel only. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. This appliance is classified as a CLASS 1 LASER product. The CLASS 1 LASER PRODUCT MARKING is located on the rear exterior. [. . . ] Press M while playing the front side or press m while playing the reverse side. Press m while playing the front side or press M while playing the reverse side. 2 Press DECK A Z or DECK B Z. 3 Insert a tape in deck A or B. Insert with the side you want to play/record facing forward. Fast-forward Rewind Tips Tape Playing a tape You can use TYPE I (normal) or TYPE II (CrO2) tapes. The deck automatically detects the tape type. · You can use the digipad for tape operations. · Pressing TAPE A/B while the power is off automatically turns the power on. · When you want to reduce the hiss noise in low-level high-frequency signals, press DOLBY NR so that "DOLBY NR" appears in the display. · When a tape is inserted, corresponding presence indicator lights up. 1 Load a tape. 2 Press DIRECTION repeatedly to select g to play one side, j to play both sides, or RELAY* (Relay Play) to play both decks in succession. Searching for the beginning of a track (AMS*) During playback, press . or > repeatedly for the number of songs you want to skip forward (or backward). The search direction, + (forward) or ­ (back), and number of songs being skipped (1~9) appear in the display. Example: searching forward 2 songs 3 Press nN. The tape starts playing. Press nN again to play the reverse side. The required tape length for the currently selected CD appears, followed by the total playing time for side A and side B (Tape Select Edit). Note Tape 4 Press . or > repeatedly until the track you want appears in the display. Total playing time Disc tray Track number number (including selected track) PROGRAM You cannot use Tape Select Edit for discs containing over 20 tracks. Timer-recording radio programs To timer-record, you must set the clock (see "Setting the time" on page 11) and preset the radio stations (see "Presetting radio stations" on page 15) beforehand. MUSIC 1 2 3 MOVIE A B GAME TOOL 1 Tune in the preset radio station (see "Listening to the radio" on page 15). 5 Press ENTER. The track(s) is (are) programmed. The program step number appears, followed by the total playing time. 2 Press CLOCK/TIMER SET. "DAILY1 SET" appears. 3 Press . or > repeatedly to select "REC SET", then press ENTER. 6 To program additional tracks, repeat steps 3 to 5. "ON" appears and the hour indication flashes. Skip step 3 to select tracks from the same disc. 4 Set the time to start recording. Press . or > repeatedly to set the hour, then press ENTER. or > repeatedly to set the minutes, then press ENTER. The hour indication flashes again. 7 Press CD SYNC HI-DUB. Deck B stands by for recording. To reduce the hiss noise in low-level high-frequency signals, press DOLBY NR so that "DOLBY NR" appears in the display. The REC PAUSE/START button flashes. continued 19 Timer-recording radio programs (continued) 5 Set the time to stop recording following step 4. The start time appears, followed by the stop time, the preset radio station to be recorded (e. g. , "TUNER FM 5"), then the original display appears. 6 Insert a recordable tape into deck B. 7 Turn off the power. When the recording starts, the volume level is set to the minimum. To Do this Check the setting Press TIMER SELECT and press . or > repeatedly to select "REC SELECT", then press ENTER. [. . . ] · Insert only the stripped portion of the speaker cord into the SPEAKER jack. Inserting the vinyl portion of the speaker cord will obstruct the speaker connections. · The protective device on the amplifier has been activated because of a short circuit. ("PROTECT" and "PUSH POWER" flash alternately. ) Turn off the power, eliminate the short-circuit problem and turn on the power again. [. . . ]