User manual SONY MHC-RXD3

[. . . ] The model and serial numbers are located on the rear panel. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. To prevent fire or shock hazard, do not expose the unit to rain or moisture. [. . . ] "TAPE A (or TAPE B) <<< ­1" appears. Press +** during play when the 9 indicator is lit. * The deck stops automatically after repeating the sequence five times (Deck B only). **To enjoy relay play, the tape in deck A must be always on the front side. If the tape in deck A is on the reverse side, only the tape in deck B repeats playing both sides. The AMS function may not operate correctly under the following circumstances: ­ When the unrecorded space between songs is less than 4 seconds long. ­ If completely different information is recorded on the left and right channels. ­ When there are continuous sections of extremely low level or low frequency sound (like those of a baritone sax). When the system is placed near a television. (In this case, move the system farther away from the television or turn off the television. If you want to record from the reverse side, press TAPE B 9 to light its indicator after pressing REC in step 2. With the side you want to play/record facing forward The indicator on TAPE B ( (for front side) lights up. This function lets you repeat a single CD or all CDs in normal play, Shuffle Play and Program Play. Each time you press the button during normal playback, the display changes as follows: N Playing time on the current track µ Remaining time on the current track µ Disc number of the current track and "PLAY" µ Clock display (for about 10 seconds) µ Effect name or "FLAT" µ Name of spectrum analyzer display pattern Do the following procedure to change the repeat mode. To repeat Press All the tracks on PLAY MODE repeatedly the current CD until "1 DISC" appears in the display. all the tracks on PLAY MODE repeatedly all CDs until "ALL DISCS" appears in the display. Only one track REPEAT repeatedly until "REPEAT 1" appears in the display while playing the track you want to repeat. The total playing time and the number of tracks on a CD are displayed in stop mode. If you press DISPLAY/DEMO in stop mode, the clock display appears for about 10 seconds, then the display returns to the previous indication. Playing the CD tracks in random order ­ Shuffle Play You can play all the tracks on one CD or all the CDs in random order. Press PLAY MODE repeatedly until "SHUFFLE" or "PROGRAM" disappears from the display. The tracks continue playing in their original order. [. . . ] The demonstration mode appears automatically the first time you plug in the power cord. If there is a power outage lasting longer than half a day, redo the following: -- Clock setting (see "Step 2: Setting the time" on page 6) -- Preset stations (see "Step 3: Presetting radio stations" on page 7) -- Timer settings (see "Waking up to music" on page 27 and "Timerrecording radio programs" on page 28) There is no sound. Insert only the stripped portion of the speaker cord into the SPEAKER jack. Demagnetize the tape heads and the metal parts that have contact with the tape every 20 to 30 hours of use with a separately sold demagnetizing cassette. [. . . ]