User manual SONY MHS-CM1/V MODE D’EMPLOI

[. . . ] With your Digital Handycam, you can capture life's precious moments with superior picture and sound quality. Your Digital Handycam is loaded with advanced features, but at the same time it is very easy to use. You will soon be producing home video that you can enjoy for years to come. WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. For the customers in the U. S. A. and CANADA DISPOSAL OF LITHIUM ION BATTERY. LITHIUM ION BATTERY. [. . . ] (2) On the VCR, locate just before the insert start point [a], then press X to set the VCR to the playback pause mode. (3) On your camcorder, locate the insert end point [c] by pressing m or M. Then press X to set it to the playback pause mode. (4) Press ZERO SET MEMORY on the Remote Commander. The ZERO SET MEMORY indicator flashes and the end point of the insert is stored in memory. (5) On your camcorder, locate the insert start point [b] by pressing m, then press z REC and the button on its right simultaneously to set your camcorder to the recording pause mode. (6) First press X on the VCR, and after a few seconds press X on your camcorder to start inserting the new scene. Inserting automatically stops near the zero point on the counter. The end point [c] of the insert stored in memory is canceled. 5 REC 4 0:00:00 ZERO SET MEMORY ZERO SET MEMORY To change the insert end point Press ZERO SET MEMORY again after step 5 to erase the ZERO SET MEMORY indicator and begin from step 3. Notes The zero set memory function works only for tapes recorded in the Digital8 system. The picture and sound recorded on the section between the insert start and end points will be erased when you insert the new scene. Attachment of a conversion lens (optional) may influence the SteadyShot function. If you cancel the SteadyShot function The SteadyShot off indicator appears on the screen. Your camcorder prevents excessive compensation for camera-shake. Notes on FLASH MODE and FLASH LVL You cannot adjust FLASH MODE or FLASH LVL if the flash (optional) is not compatible with FLASH MODE or FLASH LVL. FLASH MODE and FLASH LVL are displayed only when an external flash (optional) is connected to the intelligent accessory shoe. 81 Changing the menu settings POWER switch VCR Icon/item HiFi SOUND Mode z STEREO 1 2 Meaning To play back a stereo tape or dual sound track tape with main and sub sound To play back a stereo tape with the left sound or a dual sound track tape with main sound To play back a stereo tape with the right sound or a dual sound track tape with sub sound To correct jitter To not correct jitter. Set TBC to OFF when playing back a tape on which you have dubbed over and recorded the signal of a TV game or similar machine. To reduce picture noise To reduce a conspicuous afterimage when the picture has a lot of movement To adjust the balance between the stereo 1 and stereo 2 TBC* z ON OFF VCR TBC stands for "Time Base Corrector". DNR* z ON OFF VCR DNR stands for "Digital Noise Reduction". AUDIO MIX -- VCR ST1 PB MODE z AUTO ST2 VCR To automatically select the system (Hi8/ standard 8 or Digital8 ) that was used to record on the tape, and play back the tape To play back a tape that was recorded in the Hi8/standard 8 system when your camcorder does not automatically distinguish the recording system To convert digital video signals into analog video signals via your camcorder. To convert analog video signals into digital video siginals via your camcorder. / A/V t DV OUT z OFF ON VCR * When you play back tapes recorded in the Hi8/standard 8 system only. Notes on AUDIO MIX When playing back a tape recorded in the 16-bit mode, you cannot adjust the balance. You can adjust the balance only for tapes recorded in the Digital8 system. [. . . ] 153 OVERLAP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Photo scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Photo search . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40, 53 Picture search . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]