User manual SONY MICRO VAULT STYLE

[. . . ] Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 1 o superior CAUTION: You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. 1 ou plus Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] ĸ文 When Using USB Flash Drive for the First Time (Installing the Device Driver) Ordinarily, the device driver is installed automatically when you connect the Micro Vault. 0 cards or boards, you may need to initiate installation manually. Follow the instructions displayed on the screen to search for a suitable driver. ϸ ______________________________ Basic Operation Note: Please remove the Micro Vault properly following the procedure described in this manual. Otherwise, data may not be recorded correctly. Precauções de transferência e remoção Precauciones para la transferencia y la eliminación Précautions pour le transfert et la suppression des données Setup When running Windows 7, Windows Vista, Windows XP (SP3 and higher) Once the Micro Vault is connected to the computer, the drive icon for the Micro Vault device appears. (The drive name varies , depending on your computer system. ) You can now copy and save data on the Micro Vault by dragging files and folders on the drive icon, just as you would when copying data to a hard disk or to a floppy disk. 1 and higher Once the Micro Vault is connected to the computer, the drive icon for the Micro Vault device appears. You can now copy and save data on the Micro Vault by dragging files and folders on the drive icon, just as you would when copying data to a hard disk or to a floppy disk. ƌ本手册中介绍的步骤正确删除MV随身存。否则不能正确录制数据。 Meanings of the Indicator Light Indicator Light Status Off On When the Micro Vault is in use, the indicator light indicates its status as follows. Meaning Standby Data transfer in progress (Do not remove the Micro Vault while the indicator light is flashing. ) ™ ® ™ ® Disconnection Double-click (Safely Remove Hardware) in the task tray in the lower right portion of the screen. In the window that appears, select the name of the device that is to be removed, then click the Stop button. When the Stop a Hardware Device screen appears, make sure that the correct information is displayed, and then click the OK button. When the “Safe to Remove Hardware” message appears, you may remove the Micro Vault. (The icon and messages that appear may vary depending on the version of the OS. ) When running Windows Vista, you can also select “Safely Remove Hardware” by rightclicking the Micro Vault drive icon in Explorer or My Computer. When removing the Micro Vault while Virtual Expander is running, be sure to end the program first by right-clicking the Virtual Expander icon in the task tray and selecting “End” from the menu that appears. When running Windows 7, Windows Vista, Windows XP • La couverture de garantie de ce produit se limite au support USB de stockage de données lui-même, lors d’une utilisation normale respectant les directives du présent mode d’emploi avec les accessoires inclus avec cet appareil et avec un des systèmes d’exploitation mentionnés ou recommandés. 1 and higher Drag the Micro Vault icon to the Trash. After confirming that the Micro Vault is in standby mode, disconnect the Micro Vault. [. . . ] Note that the and symbols are not used in this manual. :USM4GM, USM8GM, USM16GM ™ ® • Our product warranty is limited only to the USB Flash Drive itself, when used normally in accordance with these operating instructions and with the accessories that were included with this unit in the specified or recommended system environment. Services provided by the Company, such as user support, are also subject to these restrictions. € The Company cannot accept liability for damage or loss resulting from the use of this unit, or for any claim from a third party. [. . . ]