User manual SONY MJ-L1

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. US and foreign patents licensed from Dolby Laboratories Licensing Corporation. This caution label is located inside the unit. [. . . ] "Complete" appears in the display for a few seconds and the track selected in step 2 is erased. To stop before the track has been erased Press . The track was recorded or edited on another MD deck and is record-protected. If you still want to erase the track, press ENTER/YES while this indication is displayed. You can erase all recorded tracks, titles and names at the same time. Note that once erased, MD data cannot be recovered. Example: Moving C to track position 2 Track number Moving 1 A 2 C 3 B 4 D 1 A 2 B 3 C 4 D In the following cases, you can divide a track into two or more tracks and put new track numbers for searching particular points of the tracks. ⷠWhen you recorded from an analog source and therefore the MD contains only one track number · When you want to put markings in a track to find particular points After you divide a track When all recorded tracks, the disc name, and titles on the MD have been erased, "Complete" appears for a few seconds. By using the divide, erase, and combine functions, you can erase specific portions of a track. Example: Erasing a part of track A Track number Dividing Part to be erased 1 3 A B C A is divided into 3 parts. The total number of tracks on the MD increases by one and all tracks following the divided track are renumbered. Example: Dividing track 2 to create a new track for C Track 1 2 3 number A B C D Dividing 1 23 4 A B C D Track 2 is divided, creating a separate track for C, and all the following tracks are renumbered. 2 Turn the JOG dial until the track Number you want to move appears in the display. For example, if you want to move 7th track to 1st, turn the JOG dial until 7th track appears in the display. Track number you want to move Music calendar You can change the position of any track. After you move a track, the tracks between the new and old track positions are automatically renumbered. 5 Turn the JOG dial until the new track Point where you want to create a new track. New track number Track number you want to move " in the display, and the starting portion of the new track begins playing repeatedly. After you have moved the track, "Complete" appears for a few seconds. To stop before the track has been moved Press . This sometimes happens when you have edited the same track many times. This is due to a technical limitation of the MD system, not a mechanical error. [. . . ] Replace it with another recordable MD with fewer recorded tracks or erase unnecessary tracks. An incompletely inserted MD cannot be pulled out. m The MD deck's self-lock system has gripped the MD. Insert the MD completely, then press MD §. [. . . ]