User manual SONY MPD-AP20U

[. . . ] Messages about the new hardware appear on the screen, then disappear. 3 Confirm that the drive is detected. On your desktop, double-click [My Computer] and confirm that the following icons are present. · · · · The "Memory Stick" reader/writer appears as "Removable Disk". 4 Insert the supplied software disc and install the software. To install the software, refer to the supplied "Software Quick Start Guide". 5 If your computer does not detect the drive If your computer does not detect the drive, read and perform the following. · Disconnect the USB cable from your computer's USB connector. [. . . ] · The CHARGE/BUSY indicator does not light green, even when the drive is connected to your computer. Verify the connections between the drive, AC power adapter, power cord, and power outlet. 6 When Using Windows 2000 Perform the following procedure to set up the drive with Windows 2000. Caution To be able to use the drive, Windows 2000 must be updated with Windows 2000 Service Pack 3 or later (hereafter, "SP3"). Notes · Consult the Microsoft Corporation Web site on information about obtaining service packs. · If you are unsure whether Windows 2000 was updated with SP3, perform the following to confirm it. On your desktop, right-click [My Computer] and click [Properties] on the shortcut menu. If "Service Pack 3" appears under "System" on the [General] tab in the [System Properties] dialog box, SP3 is installed. 1 Turn on your computer. Caution Be sure to log on as a user with "Administrator" access privileges. 2 Connect the drive to the power outlet with the AC power adapter and to your computer with the USB cable. Power cord To power outlet AC power adapter Windows 2000 To USB connector of your computer USB cable CHARGE/BUSY indicator Caution · Connect only the supplied AC power adapter and cord. · Connect the drive directly to the USB connector of your computer. Operation through a USB hub (including keyboard USB hubs) cannot be guaranteed. The CHARGE/BUSY indicator of the drive lights green. Messages about the new hardware appear on the screen, then disappear. 7 3 Confirm that the drive is detected. On your desktop, double-click [My Computer] and confirm that the following icons are present. · · · · The "Memory Stick" reader/writer appears as "Removable Disk". 4 Insert the supplied software disc and install the software. (For details, See next page. ) 12 Removing the device driver There is an uninstaller on the provided software disc. Use it to remove the device driver. 1 2 Insert the software disc into the CD-ROM drive of your computer. Open the USB folder on the software disc, then double-click "UNINST. EXE". The following dialog box opens. Note If you inserted the software disc into the drive, copy "UNINST. EXE" to your hard disk before performing this procedure. 3 Click [Yes]. The following dialog box opens. Windows 98 Second Edition 4 Stop the device with on the taskbar, then disconnect the USB cable from your computer. 13 5 Click [OK]. The following dialog box opens. 6 Click [Yes]. Your computer restarts. 14 When Using Mac OS Perform the following procedure to set up the drive with a Macintosh computer. Installing the writing software 1 2 Turn on your computer. Insert the supplied software disc into the CD-ROM drive of your computer and install the writing software. Note With Mac OS 9, the system extensions are installed along with the writing software. To install the software, refer to the supplied "Software Quick Start Guide". Connecting the drive 1 2 Turn on your computer. Connect the drive to the power outlet with the AC power adapter and to your computer with the USB cable. Power cord To power outlet AC power adapter Mac OS To USB connector of your computer USB cable CHARGE/BUSY indicator Caution · Connect only the supplied AC power adapter and cord. · Connect the drive directly to the USB connector of your computer. [. . . ] Connect the drive to the power outlet with the AC power adapter and to your computer with the USB cable. Power cord To power outlet AC power adapter Mac OS To USB connector of your computer USB cable CHARGE/BUSY indicator Caution · Connect only the supplied AC power adapter and cord. · Connect the drive directly to the USB connector of your computer. Operation through a USB hub (including keyboard USB hubs) cannot be guaranteed. The CHARGE/BUSY indicator of the drive lights green. 15 3 Confirm that the drive is detected. Insert a CD-ROM into the drive and confirm that a CD-ROM icon appears on the desktop. [. . . ]