User manual SONY MPK-THF

[. . . ] Turn off the power and leave for a while to cool down before removing the digital still camera from the marine pack. Be careful not to drop the digital still camera when removing it. When using this marine pack while diving, be sure to pay attention to the surrounding situation. Lack of attention may cause an accident while diving. [. . . ] Symptom There are drops of water inside the marine pack. cause/Corrective Actions There are scratches or cracks on the O-ring. The recording function The battery pack has run out. Insert another "Memory Stick Duo" or erase unneeded data from the "Memory Stick Duo. White balance button, Flash Press the button again while viewing the present button, Macro button or setting on the screen. Image size button will not switch modes. The playback image is not The digital still camera may not be set to displayed in the color you (Underwater). The underwater white balance may not be set correctly. If sun oil is on the marine pack, be sure to wash it off thoroughly using lukewarm water. If the marine pack is left with sun oil on its body, the surface of the marine pack may become discolored or damaged. If water happens to leak in, stop exposing the marine pack to water immediately. If the digital still camera gets wet, take it to the nearest Sony dealer immediately. Notes Be careful not to pinch the supplied strap of the LCD hood when you close the marine pack body. Front glass of the marine pack has anti-fogging effect, however install the digital still camera in a low-humidity room or a similar environment. Spread the LCD hood and detach it from the guide. Before using the digital still camera underwater, first take the marine pack to a depth of about 1 m (3. 3 feet) and check that the digital still camera is operating properly and that the marine pack is not leaking, then commence your dive. In the unlikely event that a malfunction of the marine pack causes damage due to water leakage, Sony does not guarantee against damages to the equipment contained in it (digital still camera, battery pack, etc. Icon display on the screen Pressing the control button one time The present settings are displayed next to each control button. (-2) Pressing the control button two times The present setting mode icon that changes by pressing the control button is displayed in the center of the screen. (-2) Pressing the control button three or more times Keep pressing the control button until the desired mode icon is displayed in the center of the screen. (-2) Mode available with the marine pack Control Control Control button 1 button 2 button 3 (Shooting mode) (Underwater white balance) (Flash) Control button 4 (Macro) Control button 5 (Image size) This equipment uses an O-ring to maintain its water resistance. [. . . ] Be sure to read the separate O-ring Maintenance Manual. Important details regarding handling of the O-ring are described in this manual. You can play back images using the sound. You cannot hear the Opening or closing the marine pack in hot or humid locations may result in fogging of the front glass. [. . . ]