User manual SONY MPK-WE

[. . . ] After recording in a location with a sea breeze, wash this unit thoroughly in fresh water with the buckles fastened to remove salt and sand, then wipe with a soft dry cloth. It is recommended that you submerge this unit in fresh water for about 30 minutes. If it is left with salt on it, metal portions may be damaged or rust may form and cause water leakage. If sun oil is on this unit, be sure to wash it off thoroughly using lukewarm water. [. . . ] (Not all cameras are available in all countries or regions. ) This unit is waterproof so the camera can be used in the rain, snow, at the beach, or underwater. Using this unit with the camera setting to (Underwater) or (Underwater) will enable you to record beautiful underwater images. Install the camera in this unit in a room with low-humidity or a similar environment. Opening or closing this unit in hot or humid locations may result in fogging of the front glass. Before recording images underwater, first take this unit to a depth of about 1 m (3. 3 feet) and check that it operates properly and that there are no leaks, then commence your dive. Install the camera in this unit before diving, and avoid opening and closing this unit while on board boats or at the seashore as much as possible. When installing the camera, do it in a place that has as low a humidity as possible. Before using this unit, make sure that no debris has been caught between the front and back halves of this unit's body. Before using this unit, always check the number of recordable images and remaining battery life. The most suitable time for recording images is between 10:00 AM and 2:00 PM, when the sun is directly overhead. To record pictures in places where the sunlight does not reach well or at night, please use the underwater video light HVL-ML20M (sold separately). Be sure to use a fully charged battery pack. Be sure that "Memory Stick Duo" media has enough space to record images. (DSC-W290/ W275/W270 only) The AF Illuminator cannot be used with this unit. The recording function The battery pack has run out. Insert another "Memory Stick Duo" media or erase unneeded data from the "Memory Stick Duo" media. Leave the camera in the cool place for a while to cool down. The playback image is not The camera may not be set to displayed in the color you (Underwater) or (Underwater). The underwater white balance may not be set correctly. check the underwater white balance setting of the camera. [. . . ] We recommend attaching the hand strap (supplied) before using this unit. (See illustration ) We recommend attaching the diffuser when you record using flash. Align the diffuser with the front protector and press it firmly as illustrated. If water happens to leak in, stop exposing this unit to water immediately. [. . . ]