User manual SONY MPK-TRB

[. . . ] â· The battery pack has run out. B Insert another "Memory Stick" or erase unneeded data from the "Memory Stick. Do not subject the front glass to strong shock, as it may crack. â· Avoid opening the marine pack at the beach or on the water. [. . . ] â· Do not leave the marine pack under direct sunlight in a very hot and humid place for a long period of time. If you cannot avoid leaving the marine pack under direct sunlight, be sure to cover the pack with a towel or other protection. The recording and playing back function does not work. Clean off any sand or other debris that is on the O-ring, in the seating groove, or on the main body where it touches the O-ring. Coat the O-ring with a light, even layer of grease. If the cover is closed with sand or other debris adhering to these places, the main body may be damaged or water may leak into the marine pack. 2 Coat the front glass with anti-fogging lens solution. Coat the surface of the glass on the front of the marine pack with the supplied anti-fogging lens solution. 300 g (11 oz) (marine pack only) Supplied accessories Neck strap (1) Grease (1) Anti-fogging lens solution (1) Operating Instructions (1) Optional accessories Color filter kit VF-MP1K Arm kit VCT-MP1K Underwater video light HVL-ML20 (must be used together with arm kit VCT-MP1K, "InfoLITHIUM" (L series) battery pack and L series battery charger) Secure the side body, and fasten the buckle until it clicks. The model and serial numbers are located on the bottom of the unit. Record the serial number in the space provided below. ) Caution If you do not operate the camera for over three minutes during recording, the camera turns off automatically to prevent the battery from wearing down. To use the camera again, slide the POWER switch to on. When closing the marine pack body Make sure that the O-ring has not slipped out of the seating groove. Pinching the O-ring may not only damage it but also may cause water to leak into the marine pack. The serviceable life of an O-ring varies with the frequency of use of the marine pack and storage conditions, but generally it is about one year. You can play back images on the LCD screen using the control button. Keep spare O-rings (not supplied) in a cool location not exposed to direct sunlight. Do not bend them or place heavy objects on top of them. Close the marine pack without installing the digital still camera, and keep the marine pack submerged under water at a depth of about 15 cm (6 inches) for about 3 minutes and then check for water leakage. Always be sure to turn off the POWER switch when installing or removing the digital still camera. The lens may be damaged if the power is left ON. [. . . ] If it is left with salt on it, metal portions may be damaged or rust may form and cause water leakage. â· If you get suntan lotion or other greasy substances on your marine pack, wash it off with tepid water. â· Clean the inside of the pack with a soft dry cloth. Please be sure to perform the above maintenance each time you use the marine pack. [. . . ]