User manual SONY MS-M8

[. . . ] Blue Red Touch this unit with the smartphone. Touch the smartphone on the N marked part of this unit. Press the button on the unit when an incoming call arrives. [. . . ] Guía de inicio rápido Auriculares estéreo inalámbricos Press and hold the POWER button for more than 7 seconds while this unit is turned off. Keep touching the unit with the smartphone until the smartphone vibrates. Make sure that the indicator flashes blue and red alternately after you release the button. Follow the on-screen instructions to complete the connection. to disconnect , touch the smartphone again. You can select the sound from other NFC compatible Bluetooth devices. 3 One touch connection with a smartphone (NFC) Perform the pairing procedure on the Bluetooth device to detect this unit. When the list of detected devices appears on the display of the Bluetooth device, select “MS-M8. Make the Bluetooth connection from the Bluetooth device. Listening and Calling Operate the unit after making Bluetooth connection with your Bluetooth device. Tip Listening to music Profile: A2DP, AVRCP Depending on your smartphone, you may not need to download “NFC Easy Connect” to connect the unit with your smartphone by one touch. In that case, the operation and specifications may be different from the description here. For details, refer to the manual supplied with your smartphone. Charging starts when the unit and the computer are connected. 5 hours at most and the indicator (red) goes off automatically. start playback on the Bluetooth device. [. . . ] start playback on the Bluetooth device. VOL+ VOL− Connecting with the smartphone by One touch By touching the unit with the smartphone, the unit is turned on automatically and then proceeds to pairing and Bluetooth connection. 1 Set the NFC switch to ON on this unit. [. . . ]