User manual SONY MSA-64A

[. . . ] Telephone number : 858-942-2230 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. 2-GB Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] To install the device driver, you must log on with Administrator rights. 2 3 4 5 6 Insert the supplied CD-ROM into the CD-ROM drive on your computer. The Installer launcher starts up automatically. To install a driver, click the [Driver] button in the menu. Carefully read the License Agreement, and then click the [Agree] button. When you click the [Agree] button, installation of the driver starts. Click the [Next] button as prompted on the screen. When you click [Finish], the driver installation is completed. Following this, installation of the "Memory Stick Formatter" starts. Select the language on the [Choose Setup Language] screen, then click the [Next] button. Follow the instructions on the screen and click [Next]. 15-GB 7 8 When you click [Finish], installation of "Memory Stick Formatter" is completed. To use "Memory Stick Formatter, " select [Start] ­ [All Programs] ­ [Memory Stick Utility] ­ [Memory Stick Formatter]. Following this, installation of the Operating Instructions (PDF file) is performed automatically. When installation of the Operating Instructions is completed, the application selection screen returns. To end installation of the software at this point, click [Exit]. If you do so, "SonicStage CP" software will not be installed. To view the Operating Instructions, select [Start] ­ [All Programs] ­ [Sony Memory Stick Reader Writer] ­ [MSA-64A Instructions Manual]. 16-GB Installing "SonicStage CP" software on your computer 1 2 3 4 5 Do as follows to install "SonicStage CP" software. Click the [SonicStage] button in the menu. Select your region in the region selection dialog box, and click the [Next] button. Carefully read the License Agreement, and then click the [Yes] button. Select the folder in which you want to install "SonicStage CP" software. To change the folder suggested for the installation, click the [Browse] button and then select the folder. When the storage destination folder is decided, click the [Next] button. 6 7 Click the [Done] button. · When you carry out this operation, this unit is not recognized by your computer. To make this unit recognize again, disconnect the USB cable from your computer and connect the USB cable to your computer again. 22-GB How to Use (When using Mac OS) You can use the driver provided as a standard feature of the OS. Operate as described in the following. You can use this unit without installing the driver, by simply connecting this unit to your computer. 1 2 3 4 Turn on your computer. Insert Memory StickTM media to this unit and connect the USB port on this unit with a USB port on the computer main unit using the special USB cable supplied. See page 18 for how to connect this unit and your computer. Driver installation starts automatically and the driver is installed on the computer. When driver installation is completed, a drive icon of this unit appears on the desktop and this unit can now be used. PNote The drive icon of this unit is not displayed on the desktop when Memory StickTM media is not inserted to this unit. Removing this unit from your computer or removing Memory StickTM media from this unit 1 2 3 4 Close the software used by this unit. Confirm that the access lamp is not blinking. Drag the drive icon of this unit to the "Trash" icon. Alternatively, place the drive icon of this unit in the selected state and select "Eject" from the "Special" menu in the upper left of the screen. Remove this unit from your computer or remove Memory StickTM media from this unit. 23-GB PNotes · The access lamp lights when you insert Memory StickTM media into the unit. This blinking indicates that the data on the Memory StickTM media is being accessed. Never remove the Memory StickTM media turn off the computer or unplug the USB cable while the access lamp is blinking. Doing so may damage the data on the Memory StickTM media. · Unplugging the USB cable or removing the Memory StickTM media in this unit, without performing the operations above, may cause damage to the Memory StickTM media. [. . . ] (Page 11) t When you have backup data, restore the backup data to the computer. For how to use the backup tool, see the Help manual for "SonicStage CP" software. 34-GB Specifications Interface: Hi-Speed USB (USB 2. 0) General Power consumption External dimensions Mass Operating conditions Max. 39 mm × 18 mm × 86 mm (1 9/16 × 23/32 × 3 1/2 in. ) (Width × Height × Depth) Approx. 28 g (1 oz. ) (not including Memory StickTM media) Temperature 0 °C to 40 °C (32 °F to 104 °F) Humidity 20 % to 80 % (condensation not allowed) Design and specifications are subject to change without notice. [. . . ]