User manual SONY MSAC-FD1B

[. . . ] ­ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 92/31/EEC This equipment complies with the EMC regulations when used under the following circumstances: · We recommend that you use the optional PC card adaptor for Memory Stick, MSAC-PC1/PC2, when you use a notebook computer. ⷠYou can not use this floppy disk adaptor with Digital Mavica or Mavicap. [. . . ] Install the software needed to use the adaptor. If you are using Windows NT, log in with the permission of administrator. Insert the CD-ROM supplied with the adaptor into the CD-ROM drive (in this example, the drive is "D"). Follow the on-screen instructions to complete the installation of the program file. When the installation is complete, a message appears telling you to restart the computer. The adaptor can no longer be used after uninstall the software. pNote Setting the write-protect switch to "LOCK" position, prevents the writing or deleting of data into "Memory Stick" and formatting the "Memory Stick. Grasp the "Memory Stick" that protrudes from part A of the floppy disk adaptor and pull out gently. * Procedures for use are the same as with a floppy disk. When copying a file onto the "Memory Stick" with the adaptor, the computer's "time-remaining" indication may not be correct. ⷠDo not compress the drive with adaptor inserted. ⷠUse the "Memory Stick Format" program to format a new "Memory Stick" (see p. To conserve battery power, always remove the floppy disk adaptor from the drive when the adaptor is not in use. If you are using Windows NT A 2-mode driver is installed in addition to the driver software for this product. MSAC-FD1 cannot be used together with a 3-mode driver. To use a 3-mode driver, uninstall the driver software for this product. The icon does not change immediately after inserting the adaptor into the floppy disk drive. The "Memory Stick Format" program must always be used when the adaptor is used to format a "Memory Stick. [. . . ] If the adaptor is still in sleep mode, leave the adaptor for a while before reinserting it. ) The personal computer enviroment, size and number of files performing transfer and state of data recorded on the "Memory Stick" will cause slight changes in speed. We recommend that you use the optional PC card adaptor for Memory Stick, MSAC-PC1/PC2, when you use a notebook computer. [. . . ]