User manual SONY MSAC-FD2M annexe 1

[. . . ] The specified USB cable (supplied) must be used with the equipment in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules. 92/31/EEC This equipment complies with the EMC regulations when used under the following circumstances: · ) You can connect this unit to a personal computer so that data in a "Memory Stick" can be transferred to the personal computer at high speed. You can also use a "Memory Stick" as a removable disk. This manual describes how to connect this unit, how to install the driver, how to use and customer service. [. . . ] "Memory Stick" formatted on a Macintosh sometimes cannot be used on "Memory Stick"-compatible device. How to use Insert the connector (A) on the specified USB cable into the USB jack on the personal computer (into any USB jack on the personal computer if the personal computer has more than one USB jack). Insert the connector (B) on the specified USB cable into the USB jack on this unit until it clicks into place. The access lamp lights when you access data on "Memory Stick". When the access lamp is lit, never remove the "Memory Stick", turn off the power of your personal computer or pull out the USB cable. Doing so might damage the data in "Memory Stick. " · When disconnecting this unit from the personal computer, do not hold it by its cable; hold it by its connector. Make sure that you have all the accessories below. If some of the accessories are missing, contact the store or purchase of a Sony dealer or local authorized Sony service facility. First, you must install the USB driver software in the package on the personal computer you are using. Follow the procedure below to install the USB driver software. First, you must install the USB driver software in the package on the personal computer you are using. Follow the procedure below to install the USB driver software. Turn on your Macintosh to start up the Mac OS. insert the USB driver software CD-ROM (supplied) into the CDROM drive. Connect the USB jack on the personal computer to the USB jack on this unit using the specified USB cable (supplied). Drag the following two Mac driver files in the window opend in step 4 onto the System Folder in the window opened in step 5. How to use Insert a "Memory Stick" after your Macintosh has started up. When you insert "Memory Stick" into the unit, Memory Stick icon appears on the desktop. Make sure that the access lamp is not lit. Move the Memory Stick icon from the hard disk to Trash or select [Eject] from [Special] menu. How to use You may not be able to copy the whole of folder on "Memory Stick" at once to the hard disk on the Macintosh. [. . . ] T Remove the "Memory Stick" from the unit, and then start up your computer again. ⷠThe connection between the personal computer and the unit is not correct. The connection between the personal computer and the unit is not correct. Memory Stick icon does not appear in Explorer or My computer. [. . . ]