User manual SONY MSAC-US2

[. . . ] Before operating the unit, please read this instructions thoroughly, and retain it for future reference. If you have any questions about this product, you may call: Sony Customer Information Center 1-800-222-SONY(7669) The number below is for the FCC related matters only. regulatory Information Declaration of Conformity Trade Name : SONY Model : MSAC-US2 Responsible Party : Sony Electronics lnc. Address : 680 Kinderkamack Road, Oradell, NJ, 07649 USA Telephone number : 201-930-6972 This device complies with Part 15 of the FCC Rules. [. . . ] Follow the instructions starting from step 11 to complete the installation. - For Windows XP Those using Windows XP do not need to install DirectX. Close the title screen, then remove the CD-ROM from your computer. Read "License Agreement" carefully, then click "Yes. The "PIXELA ImageMixer for Sony" will be enabled after you reboot your computer. Connect the USB plug of this unit to the USB jack of your personal computer. If you are using a laptop computer After connecting the USB plug of this unit (plug A) to the USB jack of the computer, go on to page 17, [Recommended connections]. If you are using a desktop computer After first connecting this unit and the specified extension cable, connect the USB plug of the specified extension cable (plug A) to the USB jack of the computer. - For Windows 98 Following the instructions given on the screens shown below, install the USB hub. Click "Next" without entering any checkmarks. The "Add New Hardware Wizard" starts for the second time. Follow the on-screen instructions until the installation is completed. If you are using a computer where a completely new copy of Windows 98 has been installed, a message that prompts you to install a Windows 98 CD-ROM may appear on the screen. In this case, follow the instructions given, and go on installing the USB hub. If you are using a computer with more than one USB jack, do not connect any devices other than a standard mouse and a keyboard to the main computer when using this unit. Also, when using a desktop computer, connect this unit directly to one of the computer's USB jacks. When this unit is connected to the USB jack on the personal computer, and nothing is connected to the other USB jack: When a USB keyboard is connected to the USB jack on a personal computer on which a USB keyboard and mouse are equipped as standard, and this unit is connected to the other USB jack using the specified extension cable: Make the connections in the following order: 1 t 2. In either the Windows or Macintosh environments, proper operation cannot be guaranteed when you have two or more USB devices connected to one personal computer, depending on the USB devices than are used simultaneously. If you connect this unit through a hub other than the specified extension cable, proper operation is not guaranteed. Be sure to use the specified extension cable. Proper operation cannot be guaranteed on some computers even though they may be equipped with the recommended environment. If you connect another "Memory Stick"-equipped device, in addition to this unit, to one personal computer, you cannot access two or more "Memory Stick"-equipped devices at the same time. [. . . ] You have started up your computer with a "Memory Stick" inserted in this unit. T Remove the "Memory Stick" from the unit, and then start up your computer again. The connection between the personal computer and the unit is not correct. The connection between the personal computer and the unit is not correct. [. . . ]