User manual SONY MSAC-US5 annexe 1

[. . . ] When using Windows 98/98SE/Me, please refer to "When Using Windows 98/98SE/Me" described below and change disk settings from "Local Disk" to "Removable Disk. " This will cause no problems in terms of use, but settings cannot be changed to "Removable Disk" when the "Memory Stick" is recognized as a "Local Disk" in Windows 2000/XP. In this case, unlocking the LOCK switch when using the "Memory Stick" is recommended ("Precautions on use of "Memory Stick""). 1 Click the "Unplug or Eject Hardware" icon in the task tray in the lower right corner of the screen. [. . . ] If this product should prove defective in workmanship or material during the period of 1 year from the date of original purchase at retail, the same will be replaced by either the Seller, or Sony Electronics, Inc. Some states of the United States do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state in the United States, Puerto Rico or from province to province in Canada. Microsoft, and Windows are registered trademarks of Microsoft Corporation in the United States and/ or other countries. All other company names and product names mentioned here may be the trademarks or registered trademarks of their respective companies. The symbols for TM and ® are omitted in these instructions. Do not touch the terminal (A in diagram) with your hand or any metal object. ⷠDo not apply excessive pressure when writing on the label space (B in diagram) of the "Memory Stick" or the Memo Area (C in diagram) of the "Memory Stick Duo. Do not allow water onto the "Memory Stick. " · Recorded data may be damaged or lost in the following situations: ­ If you remove the "Memory Stick" or switch off this unit while writing or reading data. ­ If you use this unit where it is subject to static electricity or electrical noise. " You can check the drive letter by opening "My Computer" from the desktop. 6 Search for the drive assigned to the unit in several [GENERIC IDE DISK TYPE XX] (XX is a 2-digit number or a "=" sign and a singledigit number). 2 After opening the "Properties" window, click the [Settings] tab. 3 Check the text box for the "Current drive letter assignment, " if the drive letter assigned to the unit is the same, then the selected device drive is the drive assigned to the unit. If the drive letters are different, click [Cancel], close the properties screen, select the next [GENERIC IDE DISK TYPE XX], and check it by following the same steps. 4 Keep repeating these steps until you find the drive assigned to the unit. Disconnecting this unit from your computer 1 Close the software using this product. 2 Make sure that the unit's access lamp is not lit. 3 Move the Memory Stick icon to the [Trash], or when the Memory Stick icon is selected, choose "Uninstall" in the [Special] menu at the top left of the screen. Precautions on use of this unit ⷠThe access lamp lights while the "Memory Stick" is being accessed. Never remove the "Memory Stick, " turn off the computer, or remove the PC card adaptor, while the access lamp is on. [. . . ] Do not press it when you insert the "Memory Stick" in. When the Removable Disk is not indicated a separate Device driver may already have been installed. Connect this unit to your computer, insert a "Memory Stick" into the unit and then perform the following procedure. Connecting this unit to your computer 1 Turn on your computer , and start up Windows. [. . . ]