User manual SONY MSAC-US7

[. . . ] Before operating the unit, please read this instructions thoroughly, and retain it for future reference. If you have any questions about this product, you may call: Sony Customer Information Center 1-800-222-SONY(7669) The number below is for the FCC related matters only. regulatory Information Declaration of Conformity Trade Name : SONY Model : MSAC-US7 Responsible Party : Sony Electronics lnc. Address : 680 Kinderkamack Road, Oradell, NJ, 07649 USA Telephone number : 201-930-6972 This device complies with Part 15 of the FCC Rules. [. . . ] 0a or higher) has not been installed on your computer, the "Information" screen will appear. Follow the instructions starting from step 11 to complete the installation. - For Windows XP Those using Windows XP do not need to install DirectX. Close the title screen, then remove the CD-ROM from your computer. Read "License Agreement" carefully, then click "Yes. The "PIXELA ImageMixer for Sony" will be enabled after you reboot your computer. Connect the plug from the USB cable of this unit to the USB jack of your computer. When the computer recognizes this unit, the "Add New Hardware Wizard" will start. Do not stop the process in the middle, and continue the installation of the software until the entire process is completed, as described below. Depending on your computer, the Windows 98/98SE CD-ROM may be needed as well. If you are using a computer with more than one USB jack, do not connect any devices other than a standard mouse and a keyboard to the main computer when using this unit. Also, when using a desktop computer, connect this unit directly to one of the computer's USB jacks. ­ For Windows 2000/Me/XP ­ When you connect the plug from the USB cable of this unit to the USB jack of your computer, installation of the mouse driver will begin automatically. Click "Next" without entering any checkmarks. The "Add New Hardware Wizard" starts for the second time. Follow the on-screen instructions until the installation is completed. When this unit is connected to the USB jack on the personal computer, and nothing is connected to the other USB jack: When a USB keyboard is connected to the USB jack on the personal computer, and this unit is connected to the other jack: In either the Windows or Macintosh environments, proper operation cannot be guaranteed when you have two or more USB devices connected to one personal computer, depending on the USB devices that are used simultaneously. If you connect another "Memory Stick"-equipped device, in addition to this unit, to one personal computer, you cannot access two or more "Memory Stick"-equipped devices at the same time. Remove the "Memory Stick" from this unit, or turn the other device(s) off. Be sure to connect this unit directly to the USB jack of the personal computer itself. If you connect it through the USB jack of a keyboard or through a USB hub, proper operation is not guaranteed. Proper operation cannot be guaranteed on some computers even though they may be equipped with the recommended environment. [. . . ] "Memory Stick" is not in this unit. Your personal computer cannot recover from standby state or sleep state. You are using the software that is not supported for scroll and zoom functions. Device other than this unit is connected to the USB jack on the personal computer. [. . . ]