User manual SONY MSMT2G/TQ

[. . . ] (except camera models in step 4) When installing the camera into this unit, align the camera mounting shoe with the guide inside the front body of this unit, and then push the rear of the camera mounting shoe until it clicks into place. The models of Sony digital video camera recorders (referred to below as "camera") described below may not be available in all countries/regions. When using a camera with a manual lens shutter, open the lens shutter. Unlock the write-protect tab on the "Memory Stick Duo" media and the cassette tape to enable them to record images. [. . . ] Unlock the write-protect tab on the "Memory Stick Duo" media and the cassette tape to enable them to record images. Make sure that the tape, "Memory Stick Duo" media, disc, hard disk and internal memory have enough space to record images. Make sure that the disc is not finalized. The reflex prevention ring prevents external light from being reflected inside the sports pack (referred to below as "thisunit") and entering the lens. When using a camera without a reflex prevention ring, keep your back away from sunlight as much as possible. Be sure to keep this unit horizontal when installing the camera mounting shoe. Installing the camera mounting shoe in a vertical motion may damage the camera mounting shoe and the front body. Be sure not to cover the lens, LCD screen, view finder, zoom lever or PHOTO button with the cable. When using a camera with an internal power switch linked to the switching action of the LCD screen, connecting the Audio/Remote plug will switch the Still image recording mode/Video playing mode of the camera to Movie recording mode. whenusingHDR-XR520V/XR520/XR500V/XR500(Seeillustration-5-A) Open the jack cover and connect the plug. attach the camera mounting shoe to the camera. Install the camera into this unit, keeping the cable on the top side of the camera. Secure the cable in the clip of the camera mounting shoe, taking care not to catch the cable on the LCD screen. If the camera battery is too large for the cable to be passed behind it, pass the cable along the top of the battery and fasten the cable with clips. whenusingDCR-SR85/SR75/SR65/SR55/SR46/SR45/SR36/SR35(See illustration-5-J) Open the jack cover and connect the plug. (Arrange the cable connected to this unit in a loop towards the rear of the plug, as illustrated. Install the camera into this unit with the cable curled on the top side of the camera. After installing the camera into this unit, arrange the cable. Make sure that the cable has not come off the groove of the reflex prevention ring. After installing the camera into this unit, make sure that the cable is not interfering with the lens of the camera. [. . . ] After installing the camera into this unit, arrange the cable. Make sure that the cable has not come off the groove of the reflex prevention ring. After installing the camera into this unit, make sure that the cable is not interfering with the lens of the camera. After installing the camera into this unit, arrange the cable. [. . . ]