User manual SONY MSRW-D1

[. . . ] Sony Corporation reserves the right to make any modification to this manual or the information contained herein at any time without notice. The software described herein is governed by the terms of a separate user licence agreement. nN 2 Network Media Receiver Notice Trademarks and copyrights Sony, VAIO, the VAIO logo, SonicStage, PictureGear Studio, Remote Commander, VAIO Media, VAIO Media Integrated Server, VAIO Zone and VAIO Media Console are trademarks or registered trademarks of Sony. Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation. Java is a trademark or registered trademark of Sun Microsystems, Inc. [. . . ] The Registration screen appears. If the registration of the Network Media Receiver and the VAIO computer are cancelled, you need to begin the registration again. nN 39 Network Media Receiver Using the Network Media Receiver - general settings To register the Network Media Receiver to your VAIO computer, proceed as follows: 1 Click Start on the Windows taskbar, select All Programs. 2 Point to VAIO Media, point to Server Administration, and click Console. The VAIO Media Console dialog box appears. 3 In the Access Control Settings section, select the option Access this computer from other computers on the network. 5 From the VAIO Media Console, select the option Register the devices accessing this computer (recommended). The Registered Devices dialog box appears. The Device Registration dialog box appears. 8 Clear the check box Use the confirmation number to register your device. The Receiving Registration Request dialog box appears, showing the registration progress. 10 When the Registration Confirmation message box appears, respond to the prompt Do you want to add the device Sony Network Media Receiver?The Sony Network Media Receiver is added to the List of Registered Devices. Highlight Startup Menu and press SELECT. The Startup Menu screen appears. nN 45 Network Media Receiver Using the Network Media Receiver - general settings 5 6 Highlight a screen you want as the startup screen, and press SELECT. Select OK, then press the SELECT button. The startup screen which you set as default is deleted if the AC power is interrupted. Configuring your VAIO computer to start automatically You can set your VAIO computer to start automatically when the Network Media Receiver attempts to connect. This is a convenient feature to use when the computer is in a different physical location from the Network Media Receiver. This setting requires your computer to be in Standby or Hibernate mode. To have your computer start automatically when the Network Media Receiver connects, proceed as follows: 1 2 3 4 5 6 7 8 Click Start on the Windows taskbar and select Control Panel. Click Performance and Maintenance, then click System. The System Properties dialog box appears. Click the Hardware tab, then click Device Manager. The drop-down tree displays all available network adapters. Double-click the network adapter that connects the computer to the Network Media Receiver. [. . . ] Turn on the Network Media Receiver again and check that the server appears in the Select a server screen. To use the automatic resume feature**, the VAIO computer must be in Standby or Hibernate mode. Verify that the IP address of the Network Media Receiver is obtained properly. If using a router device, the Network Media Receiver and the VAIO computer must be configured to obtain the IP address automatically. [. . . ]