User manual SONY MSU700A

[. . . ] MASTER SETUP UNIT MSU-700A OPERATION MANUAL 1st Edition (Revised 1) [Japanese/English] /1 2 3 / . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2(J) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3(J) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4(J) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The gain value increases when the v (up) button is pressed and decreases when the V (down) button is pressed. It continuously changes when either button is kept pressed. wa Iris control block IRIS 1 EXT AUTO 3 2 qjIRIS/MB ACTIVE (iris/master black active) button Press and light up this button to enable the iris and master black adjustment functions of the this unit. When the PANEL ACTIVE button is pressed, this button automatically lights. To disable only the iris/ master black control block of the panel, press this button so that it goes dark. qkMASTER BLACK control block Turn the control to adjust the master black level. The adjustment value is displayed in the display window. qlCALL button Press to send a call signal to the video camera, on which the CALL button lights. The tally lamps on the camera and the red tally lamp on CCU light when not lit, or go dark when lit. When the CALL button on the video camera is pressed, the CALL button on this unit lights and a buzzer sounds. w;Camera number/tally indication window The number of the camera being controlled from this unit is displayed in orange. When a red tally signal is sent to the camera, the number is displayed in black and the background of the number lights in red. When a green tally signal is sent to the camera, the number is displayed in black and the background of the number lights in green. When both the red and green tally signals are simultaneously sent, the left half of the background lights in red and the right half lights in green. 1 EXT (lens extender) indicator Lights when the lens extender is used. 2 IRIS control and display window When the AUTO button is not lit, you can adjust the iris manually by turning the control. The adjustment value is displayed in f numbers on the display. When the AUTO button is lit, the reference value for automatic iris adjustment can be set in a range of ±2f with this control. When the iris is closed, "CL" is displayed in the window. 3 AUTO button Press and light the button to automatically adjust the iris according to the amount of input light (Auto Iris). If you press the button when lit, it goes dark and manual iris adjustment is enabled. Note If the subject being used as the reference for automatic adjustment is lost while operating a camera having the skin tone auto iris function, the skin tone auto iris stops functioning, and the iris value at that time is maintained. In this condition, not only is the iris not automatically adjusted but also it cannot be changed manually. When you wish to change the iris, turn Auto Iris off. If Auto Iris is kept ON, the skin tone auto iris will start functioning when the subject for reference is resumed. For the skin tone auto iris, refer to the system manual. 11 (E) Locations and Functions of Parts Operation Panel in Use With HD Equipment 8Camera/CCU function ON/OFF buttons When this unit is used in an HD camera system (HDC700/750/700A/750A/900/950, HDW-700/F900, HDCU-700/900), another three camera/CCU function ON/OFF buttons (see page 6) become effective. [. . . ] Display the MSU SW Setting display for these settings in the same manner as for the screen saver setting. MSU SW Setting PIX/WF Syncro ON Exit PIX/WF All Mode ON PIX/WF Control Mode Direct Alternate MSU SW Setting PIX/WF Syncro ON Exit Screen Saver Wait Time ON 5 PIX/WF All Mode ON PIX/WF Control Mode Direct Alternate Screen Saver Screen saver setting area Wait Time ON 5 2 3 Press [ON] to set it to inverse video to activate the screen saver. When the screen saver is turned on, set the wait time (in units of minutes) until it activates by pressing f or F. PIX/WF Synchro setting Specify whether to switch the outputs from the PIX2 OUTPUT and WF2 OUTPUT connectors in synchronization with RGB switching on the adjustment display in white or black shading adjustment. Press the [ON] button to turn on or off the synchronization. [. . . ]