User manual SONY MSX-1GST

[. . . ] As the main plug is used to disconnect the unit from the mains, connect the unit to an easily accessible AC outlet. Should you notice an abnormality in the unit, disconnect the main plug from the AC outlet immediately. Do not expose batteries or apparatus with batteryinstalled to excessive heat such as sunshine, fire or the like. The unit is not disconnected from the mains as long as it is connected to the AC outlet, even if the unit itself has been turned off. [. . . ] · When multi channel Linear PCM signals are received via an HDMI IN jack, "A. F. D. AUTO" will be selected automatically. x SPORTS (Sports) Reproduces the feeling of sports broadcasting. x PORTABLE (Portable Audio Enhancer) Reproduces a clear enhanced sound image from your portable audio device. This mode is ideal for MP3 and other compressed music. x PLII MS (Pro Logic II Music) Perform Dolby Pro Logic II Music mode decoding. This setting is ideal for normal stereo sources such as CDs. x PLIIX MS (Pro Logic IIx Music) Performs Dolby Pro Logic IIx Music mode decoding. This setting is ideal for normal stereo sources such as CDs. x NEO6 MUS (Neo:6 Music) Performs DTS Neo:6 Music mode decoding. This setting is ideal for normal stereo sources such as CDs. 46GB · When one of the sound fields for music is selected, no sound is output from the subwoofer if all the speakers are set to "LARGE" on the SPEAKER menu. However, the sound will be output from the subwoofer if ­ the digital input signal contains LFE signals. ­ the front and surround speakers are set to "SMALL". ­ the sound field for movie is selected. ­ the "PORTABLE" is selected. Tips · You can identify the encoding format of DVD software, etc. , by looking at the logo on the package. · When a multi channel signal is input, only Dolby Pro Logic IIx decoding is effective. Refer to the operating instructions of the component. Preparing for the "BRAVIA" Sync The receiver is compatible with the "Control for HDMI-Easy Setting" function. · If your TV is compatible with the "Control for HDMI-Easy Setting" function, you can set the receiver and playback components Control for HDMI function automatically by setting the TV (page 50). · If your TV is not compatible with the "Control for HDMI-Easy Setting" function, set the Control for HDMI function of the receiver, playback components and TV individually (page 51). If your TV is compatible with the "Control for HDMI-Easy Setting" function The Control for HDMI function of the receiver can be turned on simultaneously by turning on the Control for HDMI function of the TV. 1 Connect the receiver, TV and playback components via HDMI connection (page 23). (The respective components must be compatible with the Control for HDMI function. ) 2 Turn on the receiver, TV and playback components. 3 Turn on the Control for HDMI function of the TV. The Control for HDMI function of the receiver and all the connected components are turned on simultaneously. When the setup is completed, "COMPLETE" will appear. For details on setting the TV, refer to the operating instructions supplied with the TV. 50GB If your TV is not compatible with the "Control for HDMI-Easy Setting" function AMP MENU , V/v/B/b O Playing back components with one-touch operation (One-Touch Play) By a simple operation (one-touch), components connected to the receiver with HDMI connections start automatically. You can enjoy the sound/image from connected components. When you set "PASS. THRU" to "AUTO" or "ON", sound and image can be output only from the TV while the receiver remains in standby mode. When you start playback a connected component, the receiver and TV operation are simplified as follow: Receiver and TV Turns on (if in standby mode) "BRAVIA" Sync Features MENU 1 Perform the steps given in "If your TV is compatible with the "Control for HDMIEasy Setting" function" (page 50). 2 Press AMP MENU. 3 Press V/v repeatedly to select "HDMI", then press or b. [. . . ] ­ "AMP" if you want to listen to the sound from the receiver. · When you connect the receiver to a video component (projector, etc. ), sound may not be output from the receiver. · If you cannot listen to the sound of a component connected to the receiver ­ Change the input of the receiver to HDMI when you want to watch a program on a component connected via HDMI connection to the receiver. ­ Change the TV channel when you want to watch a TV broadcast. [. . . ]