User manual SONY MAVICA MVC-CD250

[. . . ] Before operating the unit, please read this manual thoroughly, and retain it for future reference. The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. [. . . ] When the AE/AF lock indicator changes from flashing to lighted up and there is a beeping sound, the focus adjustment is completed. AF lock lets you capture an image with the correct focus even if the subject is at the edge of the frame. The image will be recorded with the proper focus for the subjects. Setting the distance to the subject When shooting an image using a preset distance to the subject, or when shooting a subject through a net or window glass, it is difficult to achieve a proper focus using the auto focus function. Focus setting information is approximate, and should be used as a reference. If you point the lens up or down, the error will increase. 5 m (19 3/4 inches) with the zoom set to the T side, you may not get a clear focus. in such cases , the focus setting information flashes. Press the zoom W button until the indicator stops flashing. The focus preset does not work properly when attaching a conversion lens. You can carry out the AF lock adjustment process any number of times before you press the shutter button fully down. You can select from the following distance settings: 0. Press FOCUS again in step 3 so that the focus setting information disappears. Select 9 in step 3, then select [MULTI AF] or [CENTER AF]. This lets you adjust the exposure value which is set by automatic adjustment. If a subject is under extremely bright or dark conditions, or the flash is used, the exposure adjustment may not be effective. C Select 9 (FOCUS) with b/B, then select the distance to the subject with v/V. You can select from the following distance settings. If the image is too dark or too bright as shown below, we recommend that you adjust the exposure manually. When shooting a back-lit subject or a subject in the snow, set the exposure toward +, and when shooting a subject with extremely bright illumination such as a spotlight against a dark background, set the exposure toward ­. This function enables you to select the metering mode to suit the shooting conditions and purpose. Light is measured only for the specific region where the subject is located. [. . . ] The "InfoLITHIUM" battery pack calculates the power consumption according to the operating conditions of your camera, and displays the remaining battery time in minutes. We recommend charging the battery pack in an ambient temperature of between 10°C to 30°C (50° F to 86° F). You may not be able to efficiently charge the battery pack outside of this temperature range. When you carry or store a disc, put it in its case. [. . . ]