User manual SONY MAVICA MVC-FD51

[. . . ] Before operating the unit, please read this manual thoroughly, and retain it for future reference. To prevent fire or shock hazard, do not expose the unit to rain or moisture. This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The model and serial numbers are located on the bottom. [. . . ] Otherwise, the image data breakdown may occur. The number of images you can record on a floppy disk The number of images you can record is different depending on which image quality mode you select and subject complexity. STANDARD FINE about 30 ­ 40 images about 15 ­ 20 images If you attempt to record 55 images or above, DISK FULL appears on the LCD screen and you cannot record the image even when the remaining disc capacity indicator is not emptied. ⷠWhen the remaining disk capacity indicator flashes, image data cannot be recorded and INDEX screen may not be displayed. Flash indicator Self-timer indicator AE lock indicator Macro shooting indicator The indicators do not go off in the following modes: Picture effect, Macro, AE Lock, Self-timer, Flash, FRAME and Adjusting the exposure. When the blinking FLASH CHARGE lamp lights up, you can shoot images using the flash. Self-timer Select with the control button, then press it. About 10 seconds after you press the shutter button, the subject is recorded. The subject must be 1 5/8 feet to 10 feet (50 cm to 3 m) away from the flash. Select "+EV" or "­EV" with the control button, then press it to select the desired value. To raise the exposure value (brighten the picture): +EV To lower the exposure value (darken the picture): ­EV ¡ When the subject is too close to focus on Move the macro switch on the front of the camera to the "MACRO" side, and then focus on the subject. the macro indicator appears on the LCD screen. You MACRO can shoot a subject that is about 3 to 9 inches (about 8 to 25 cm) or more away from the lens surface in macro mode. Put back the switch until it clicks after macro recording, or you may not be able to focus on a distant subject. slide OPEN in the direction of the arrow and open the floppy disk cover. Insert the floppy disk until it clicks, then close the cover. To display the preceding recorded image, select " " with the control button, then press it. To display the next image, select " " with the control button, then press it. When the indicators on the LCD screen are not displayed, Image number STD press the left or 11/11 right side of the Number of stored images in the control button floppy disk to display the File name preceding or MVC-011S 1998 7 4 Recording date 12:30PM next image. When the ACCESS lamp is flashing, never shake or strike the unit. As well do not open the floppy disk cover, turn the power off or remove the battery pack. Select "INDEX" with the control button, then press it. [. . . ] Should the battery be swallowed, immediately consult a doctor. ⷠWipe the battery with a dry cloth to assure a good contact. ⷠDo not hold the battery with metallic tweezers, otherwise a shortcircuit may occur. Should any problem persist after you have made those checks, consult your nearest Sony dealer. [. . . ]