User manual SONY MAVICA MVC-FD7

[. . . ] Before operating the unit, please read this manual thoroughly, and retain it for future reference. To prevent fire or shock hazard, do not expose the unit to rain or moisture. This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The model and serial numbers are located on the bottom. [. . . ] ⷠWhen the remaining disk capacity indicator flashes, image data cannot be recorded and INDEX screen may not be displayed. The indicators do not go off in the following modes: Program AE, Picture effect, Manual focus, Zoom, Macro, AE Lock, Self-timer, Flash, FRAME and Adjusting the exposure. When the blinking FLASH CHARGE lamp lights up, you can shoot images using the flash. Self-timer with the control Select button, then press it. About 10 seconds after you press the shutter button, the subject is recorded. When recording in relatively dark environment, it is recommended to record after focusing manually (MVC-FD7 only). Select "+EV" or "­EV" with the control button, then press it to select the desired value. To raise the exposure value (brighten the picture): +EV To lower the exposure value (darken the picture): ­EV When the PROGRAM AE function is turned on, you cannot adjust the brightness of the image (MVC-FD7 only). ¡ When the subject is too close to focus on MVC-FD5 Move the macro switch on the front of the camera to the "MACRO" side, and then focus on the subject. the macro indicator appears on the LCD screen. You can shoot a subject that is about 3 to 9 inches (about 8 to 25 cm) or more away from the lens surface in macro mode. Move the zoom lever to the "W" side until the focus is sharp. You can shoot a subject that is at least about 3 1/4 feet (about 100 cm) away from the lens surface in the telephoto position, or about 1/2 inch (about 1 cm) away in the wide-angle position. 1 Slide POWER down to turn on the power. 3 Insert the floppy disk until it clicks, then close " " with the control button, then press it. To display the next image, select " " with the control button, then press it. When the indicators on the LCD screen are not displayed, Image number STD press the left or 11/11 right side of the Number of stored control button images in the floppy disk to display the File name preceding or MVC-011S 1997 7 4 Recording date next image. When the ACCESS lamp is flashing, never shake or strike the unit. As well do not open the floppy disk cover, turn the power off or remove the battery pack. Select "INDEX" with the control button, then press it. To display the following 6 images, select "b" with the control button, then press it. ⷠTo display the preceding 6 images, select "B" with the control button, then press it. [. . . ] Keep the lithium battery out of the reach of children. Should the battery be swallowed, immediately consult a doctor. ⷠWipe the battery with a dry cloth to assure a good contact. ⷠDo not hold the battery with metallic tweezers, otherwise a shortcircuit may occur. [. . . ]