User manual SONY MAVICA MVC-FDR3

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] Do not turn the power off or disconnect the power source. Select "INDEX" with the control button, then press it. To display the following 6 images, select "b" with the control button, then press it. â· To display the preceding 6 images, select "B" with the control button, then press it. â· To return to the normal playback screen (SINGLE screen), select an image with the control button, then press it. â· The number displayed at the upper right side of the image shows the recording order on the disk. It is different from the file number (p. This data can be viewed using a personal computer which has the JPEG or BITMAP view ability application installed. For detailed procedures using image data with an application, refer to the aplication instruction manual. Floppy disk which was recorded using this unit File name and extension The images recorded on this unit are given the file names "MVC-xxxF" or "MVC-xxxS. " "xxx" stands for a number between 001 to 999. "F" stands for FINE and is given when the picture quality is set to FINE in the menu. "S" stands for STANDARD and is given when the picture quality is set to STANDARD in the menu. the extension is "BMP" or "JPG. " "BMP" is given to the BITMAP file* recorded when the BITMAP is set to "ON" in the menu. "JPG" is given to the image data compressed in JPEG format. When the unit records the images with either of the above extensions, the extension "411" for index screen is recorded automatically at the same time. You can display this index screen data only on this unit. Number of the file name The number of the file name is reset to "001" each time you change the floppy disk. If the floppy disk already has image files recorded, the file number starts from the number following the last file number. If you want to continue to number the files sequentially in a new floppy disk, set FILE NUMBER to SERIES in the menu. Note For Macintosh, you can use the floppy disk recorded with this unit using the PC Exchange with Mac OS system 7. [. . . ] In this case, remove the floppy disk, turn off the unit, and wait about an hour for the moisture to evaporate. Should any problem persist after you have made those checks, consult your nearest Sony dealer. B Delete the images you don't want to keep, and then start recording. The disk which cannot be used with the unit is installed. [. . . ]