User manual SONY MVS-8000A

[. . . ] SWITCHER PROCESSOR PACK MVS-8000A-C MVS8000AS-C MULTI FORMAT SWITCHER PROCESSOR MVS-8000A MVS-8000ASF MKS-8110M MKS-8162A MKS-8440A MKS-8111M MKS-8170M HK-PSU04 MKS-8160A MKS-8210A BZS-8250 MKS-8161M MKS-8420M OPERATION MANUAL 1st Edition [English] WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. THIS APPARATUS MUST BE EARTHED. user will be required to correct the interference at his own expense. [. . . ] By installing one of these boards, an MVS-8000A or MVS-8000ASF can have up to two MVE-8000A or MVE9000 units connected. MKS-8210A Mix/Effect Board This is an M/E board option. The MVS-8000A has two M/ E banks installed as standard, which can be extended to four M/E banks by installing the option. The MVS8000ASF has one M/E installed as standard, and can be extended to two M/E banks by installing the option. MKS-8420M Color Correction Board A color correction board for HDTV or SDTV. It enables high-performance color correction of two channels. MKS-8440A Frame Memory Board This is a frame memory board option. A maximum of two can be installed in the MVS-8000A. One board only can be installed in the MVS-8000ASF. MKS-8110M 17-Input Board This is a 17-input board. The MVS-8000A has 17 inputs fitted as standard, and by installing 17 inputs at a time with this board, a total of 68 inputs (with three boards added) HK-PSU04 Power Supply Unit This is a backup power supply unit. The MVS-8000A is equipped with two power supply units preinstalled at the factory, but installing two HK-PSU04 units provides a 6 Overview fully redundant power supply. The MVS-8000ASF is equipped with one power supply unit preinstalled at the factory, but installing another HK-PSU04 unit provides a fully redundant power supply. BZS-8250 Simple P/P Softrware This is a software option which enables simple mix/effet functions on the MVS-8000A or MVS-8000ASF. It cannot be installed in the MVS-8000A with four M/E banks. Overview 7 Location and Function of Parts Front Panel MVS-8000A POWER A, B, C, D switches and status indicators MVS-8000ASF POWER A, B switches and status indicators POWER A, B, C, D switches and status indicators The POWER switches turn the unit on and off. The unit is powered on when the POWER switches are on the " ?" side, and powered off when the POWER switches are on the "a" side. The status indicators light in green when the unit is powered on. · MVS-8000A Depending on the configuration of your unit when shipped, the HK-PSU04 Power Supply Unit may not be installed. In this case, only the POWER A and POWER B switches are available. The unit does not operate until two of the four power switches (A, B, C and D) are on. When the HK-PSU04 are installed, operation continues as long as two power supplies are normal. · MVS-8000ASF Depending on the configuration of your unit when shipped, the HK-PSU04 Power Supply Unit may not be installed. In this case, only the POWER A switch is available. The unit does not operate until either of the two power switches (A and B) is on. When the HK-PSU04 is installed, operation continues as long as one power supply is normal. Notes · When installing the HK-PSU04 in your unit, be sure to contact your Sony service representative. · If a status indicator does not light when you turn a POWER switch on, there may be a fault in the power circuits. [. . . ] REF INPUT Relay contact outputs: 4 (30 V AC/DC, 0. 1 A) Open collector outputs: 4 D-sub 9-pin, female Complies with RS-232C standard Data transfer rate: 9600 bps Reference input and output BNC type, 75 with loop-through output HDTV systems: HD tri-level sync/SDTV analog black burst/SDTV analog sync SDTV systems: Analog black burst/analog sync REF OUTPUT BNC type, 75 HD tri-level sync (signal level of ±300mV ±10%, HDTV system only) Analog sync (signal level of ±300mV ±10%) Phase variation range: -90H to +90H MVS-8000A Multi Format Switcher Processor General Power requirements 100 to 240 V ±10% AC, 50/60 Hz Current consumption 100 V: 15 A, 240 V: 6. 25 A Peak inrush current (1) Power ON, current probe method: 120 A (100 V), 140 A (240 V) (2) Hot switching inrush current, measured in accordance with European standard EN55103-1: 95 A (230 V) Operating temperature 5ºC to 40ºC (41ºF to 104ºF) Performance guaranteed temperature 10ºC to 35ºC (50ºF to 95ºF) Storage temperature -20ºC to +60ºC (-4ºF to +140ºF) Operating humidity 10% to 90% Dimensions (w/h/d, excluding projections) 482×354×520 mm (19×14×201/2 inches) Mass Approx. 51 kg (112 lb 6 oz) (when equipped with all installable option boards and option power supply unit) DME input and output DME 1A, DME 1B, DME 2A and DME 2B MDR 68-pin Signal format LVDS Frame memory input and output FM DATA FM DEVICE RJ-45, complies with 100Base-TX standard Complies with IEEE1394 Video input Inputs 17 (BNC-type) Signal format SMPTE292M/SMPTE259M-C Signal level 0. 8Vp-p ±10% Signal transfer rate 1. 5 Gbps/270 Mbps Return loss 15 dB Cable length HDTV system: 100 m (5C-FB cable, BELDEN1694 or equivalent) SDTV system: 200 m (5C-2V cable, BELDEN8281 or equivalent) Remote control connectors CTRL RJ-45, complies with 100Base-TX standard DATA RJ-45, complies with 100Base-TX standard REMOTE 1, 2, 3, 4 D-sub 9-pin, female Comply with RS-422A standard Data transfer rate: 38. 4 Kbps GPI D-sub 25-pin, female TTL inputs: 8 Video output 24 (BNC-type) 1 to 4, 13 to 16: BNC 2 outputs 5 to 12, 17 to 24: BNC 1 outputs Signal format SMPTE292M/SMPTE259M-C Signal level 0. 8Vp-p ±10% Signal transfer rate 1. 5 Gbps/270 Mbps Outputs Specifications 15 AC input AC IN A, B, C, D 3-pin AC connector Accessories supplied 75 terminator (1) Brackets (4) Support angles (2) Screws (+B4×10) (8) Screws (+PSW4×10) (8) Operation Manual (1) Installation Manual (1) REMOTE 1, 2, 3, 4 D-sub 9-pin, female Comply with RS-422A standard Data transfer rate: 38. 4 Kbps GPI D-sub 25-pin, female TTL inputs: 8 Relay contact outputs: 4 (30 V AC/DC, 0. 1 A) Open collector outputs: 4 TERMINAL D-sub 9-pin, female Complies with RS-232C standard Data transfer rate: 9600 bps Reference input and output Accessories not supplied AC power cord (for USA and Canada only) (125 V 10 A 2. 4 m (8 ft)) (Part No. : 1-557-377-11) AC power cord (for Europe only) (250 V 10 A 2. 4 m (8 ft)) (Part No. : 1-782-929-22) BNC type, 75 with loop-through output HDTV system: HD tri-level sync/SDTV analog black burst/SDTV analog sync SDTV system: Analog black burst/ analog sync REF OUTPUT BNC type, 75 HD tri-level sync (signal level of ±300mV ±10%, HDTV system only) Analog sync (signal level of ±300mV ±10% Phase variation range: 90H to +90H REF INPUT MVS-8000ASF Multi Format Switcher Processor General Power requirements 100 to 240 V ±10% AC, 50/60 Hz Current consumption 100 V: 7. 5 A, 240 V: 3. 1 A Peak inrush current (1) Power ON, current probe method: 110 A (100 V), 150 A (240 V) (2) Hot switching inrush current, measured in accordance with European standard EN55103-1: 50 A (230 V) Operating temperature 5ºC to 40ºC (41ºF to 104ºF) Performance guaranteed temperature 10ºC to 35ºC (50ºF to 95ºF) Storage temperature -20ºC to +60ºC (-4ºF to +140ºF) Operating humidity 10% to 90% Dimensions (w/h/d, excluding projections) 482×177×520 mm (19×7×201/2 inches) Mass Approx. 28 kg (61 lb 11 oz) (when equipped with all installable option boards and option power supply unit) DME input and output DME 1A, DME 1B, DME 2A and DME 2B MDR 68-pin Signal format LVDS Frame memory input and output FM DATA FM DEVICE RJ-45, complies with 100Base-TX standard Complies with IEEE1394 Video input Inputs 17 (BNC-type) Signal format SMPTE292M/SMPTE259M-C Signal level 0. 8 Vp-p ±10% Signal transfer rate 1. 5 Gbps/270 Mbps Return loss 15 dB Cable length HDTV system: 100 m (5C-FB cable, BELDEN1694 or equivalent) SDTV system: 200 m (5C-2V cable, BELDEN8281 or equivalent) Video output Remote control connectors CTRL DATA RJ-45, Complies with 100Base-TX standard RJ-45, Complies with 100Base-TX standard Outputs 12 (BNC-type) 1 to 4: BNC 2 outputs 5 to 12: BNC 1 outputs SMPTE292M/SMPTE259M-C 0. 8 Vp-p ±10% Signal format Signal level 16 Specifications Signal transfer rate 1. 5 Gbps/270 Mbps MKS-8111M Additional 12-Input Board General Power requirements 12 V DC Power consumption Max. 10 W Dimensions (w/d) 274×94 mm (107/8×33/4 inches) Mass Approx. [. . . ]