User manual SONY MXD-D5C

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. As an ENERGY STAR® Partner, Sony Corporation has determined that this product meets the ENERGY STAR ® guidelines for energy efficiency. You are cautioned that any changes or modification not expressly approved in this manual could void your authority to operate this equipment. [. . . ] You can edit the recorded tracks after recording, using the following functions: · Track Erase Function allows you to erase recorded tracks simply by specifying the corresponding track number. ⷠAll Erase Function allows you to erase the contents of an entire MD. ⷠA-B Erase Function allows you to specify a portion within a track to erase it. ⷠDivide Function allows you to divide tracks at specified points so that you can quickly locate those points afterwards, using the AMS function. ⷠCombine Function allows you to combine two tracks into one. ⷠMove Function allows you to change the order of tracks by moving a specific track to a track position you want. ⷠName Function allows you to create and edit titles for your recorded MDs and tracks. F Edit Function allows you to change the recorded level after recording. You can erase a track simply by specifying the respective track number. When you erase a track, the total number of tracks on the MD decreases by one and all tracks following the erased one are renumbered. Since erasing merely updates the TOC, there is no need to record over material. 1 While the deck is stopped, playing, or pausing, press MENU/NO to display "Edit Menu. To avoid confusion when erasing multiple tracks, you should proceed in order of high to low track number to prevent the renumbering of tracks that have not been erased yet. The deck could not edit because the record-protect slot on the MD is open. Do not move the deck or pull out the AC power cord. After editing, "TOC" lights continuously until you eject the MD or turn off the deck. "TOC" and "TOC Writing" flash while the deck is updating the TOC. When the deck finishes updating the TOC, "TOC" and "TOC Writing" turn off. While the deck is stopped, playing, or pausing, press MENU/NO to display "Edit Menu. Turn AMS to select the track to be erased. When the track selected in Step 4 has been erased, "Complete!The track following the erased track begins playing. [. . . ] / Take out the MD, and close the record-protect tab (page 9). An attempt was made to play a disc that is not compatible with this deck (CDROM, MD data disc, etc. This does not affect the recorded material. While recording from a digital component connected through the DIGITAL OPTICAL IN connector, the digital connecting cable was unplugged or the digital component turned off. [. . . ]