User manual SONY MX-T2715

[. . . ] As an ENERGY STAR® Partner, Sony Corporation has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. For customers in Canada This Class B digital apparatus complies With Canadian ICES-003. CAUTION You are cautioned that any changes or modification not expressly approved in this manual could void your authority to operate this equipment. For the customers in Canada CAUTION TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS POLARIZED AC PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] If you divide an "LP:" track using the DIVIDE function, "LP:" is also added to the latter track. Do Steps 1 to 5 in "Recording on an MD Manually" on page 21. Play the portion of the sound source with the strongest signal level. Press MENU/NO twice to display "Setup Menu. " Turn AMS to select the program source. To select CD player section of the deck Turn AMS to display CD a component connected to the Opt DIGITAL OPTICAL IN connector a component connected to the ANALOG IN jacks Anlg 5 6 Press AMS. While monitoring the sound, turn AMS to adjust the recording level so that the OVER indication (red) of the peak level meters does not turn on, then press AMS. OVER indication Recording level can be adjusted within a range of ­ to +12 dB. (Continued) 23 Recording on MDs 7 8 9 Press MENU/NO. To start recording, do the procedure starting from Step 7 in "Recording on an MD Manually" on page 21. You can also change the recording level by using the remote Z During recording pause, press REC LEVEL +/­ repeatedly. Marking Track Numbers While Recording You can mark track numbers either manually or automatically. By marking track numbers at specific points, you can quickly locate the points later using the AMS Function or Editing Functions. MENU/NO z Note that the level cannot go above +12 dB. AMS Note You cannot adjust the recording level while playing an MD. REC r Marking track numbers manually You can mark track numbers at any time while recording on an MD. Press REC r at the place you want to add a track mark while recording. Marking track numbers automatically (Track Marking Function) The deck adds track marks differently in the following cases: · When recording from CDs or MDs with "OPT" selected by the INPUT button (when recording from a CD or MD connected through the DIGITAL OPTICAL IN connector): The deck marks track numbers automatically according to the information contained in the source being recorded. However, the deck may not automatically mark track numbers when recording from some CD players and multi disc players. Start playing the program source you want to record. The deck starts recording automatically. T. REC < > ^ AMS To stop Music Synchro-Recording Press p. Note When Music Synchro-Recording, the Smart Space Function and the Auto Cut Function turn on automatically regardless of their setting ("On" or "Off"). + ­ 1 Do Steps 1 to 5 in "Recording on an MD Manually" on page 21. The deck changes to recording pause. 26 ^ Recording on MDs 2 Start playing the program source you want to record. The most recent 6 seconds of audio data is stored in the buffer memory. Press AMS (or T. REC) to start Time Machine Recording. Recording of the program source starts with the audio data stored in the buffer memory. Fading In and Out (Fader) Z You can gradually increase the recording level at the beginning of a recording (fade-in recording) or gradually decrease the recording level at the end of a recording (fade-out recording). This function is convenient when, for example, you don't want the track cut off abruptly when the disc reaches to its end. 3 To stop Time Machine Recording Press p. Note The deck starts storing audio data when the deck is in recording pause and you start playing the program source. With less than 6 seconds of playing of the program source and audio data stored in the buffer memory, Time Machine Recording starts with less than 6 seconds of audio data. + ­ < > ^ Fade-in recording During recording pause, press FADER at the position where you want to start fade-in recording. Z flashes and the deck performs the fade-in recording until the counter reaches "0. 0s. " Fade-out recording During recording, press FADER at the position where you want to start fade-out recording. [. . . ] / Set the deck in a stable place, and repeat the recording procedure. The inserted MD is dirty (with smudges, fingerprints, etc. ), scratched, or not up to standards. / Replace the disc, and repeat the recording procedure. C13/Rec Error C13/Read Error C14/Toc Error The deck could not read the TOC of the MD properly. The deck could not read the TOC of the MD properly. [. . . ]